Data Management And Therapy Compliance; Remote Monitoring; Sd Card - ResMed Defy Mini User Manual

Data management and therapy compliance

For therapy management, the AirCurve 10 device stores patient therapy data on the device and has
the ability to transfer it remotely to the care provider. Data can then be accessed via ResMed's
™
AirView therapy management solution.
The AirCurve 10 device also stores data on the SD card. This data can be transferred via an SD Card
Reader to ResMed's ResScan
For more information on therapy management with AirView or ResScan, refer to the manuals
supplied with the software.

Remote monitoring

The AirCurve 10 device has wireless communication which has the ability to automatically transmit
summary and night profile data on a regular basis. It also allows you to change settings remotely.
The Wireless signal strength icon
strength. Advise the patient to check the signal strength on their device.
Notes:

Therapy data might not be transmitted if used outside of the country or region of purchase.

Devices with wireless communication might not be available in all regions.

SD card

Every AirCurve 10 device comes with an SD card already inserted and ready to be used. Once the
data is loaded into ResScan or AirView via the SD Card Reader, you can review and analyse data, as
well as update therapy settings and transfer them to the patient's device via the SD card.
To remove the SD card:
1. Open the SD card cover.
2. Push in the SD card to release it. Remove the SD card from the device.
Do not remove the SD card from the device when the SD light is flashing.
To insert the SD card:
1. Open the SD card cover.
2. Push the SD card into the device until it clicks.
The following message is briefly displayed: Preparing SD card, do not remove power or your
card.
™
therapy management system.
displayed at the top right of the screen indicates the signal
English 25