Spark plug gap:
0.8 ~ 0.9 mm (0.03 ~ 0.04 in)
4.Ignition spark gap
Disconnect the spark plug cap from the
●
spark plug.
Connect the dynamic spark tester 1 as
●
shown.
2 Spark plug cap
3 Spark plug
Turn the main switch to "ON".
●
Check the ignition spark gap.
●
Crank the engine by pushing the starter
●
switch, and increase the spark gap until a
misfiring occurs.
Minimum spark gap:
6.0 mm (0.24 in)
5.Spark plug cap resistance
Remove the spark plug cap.
●
Connect the pocket tester (Ω × 1k) to the
●
spark plug cap.
Check that the spark plug cap has the
●
specified resistance.
Spark plug cap resistance:
10 kΩ at 20 °C (68 °F)
*
CORRECT
OUT OF
SPECIFICATION
OR NO SPARK
MEETS
SPECIFICATION
9 - 11
IGNITION SYSTEM
INCORRECT
Repair or replace the spark plug.
MEETS SPECIFICATION
The ignition system is not faulty.
OUT OF SPECIFICATION
Replace the spark plug cap.
–
+
ELEC