Installing The Rear Brake Master Cylinder - Yamaha YFM660FP Service Manual

FRONT AND REAR BRAKES
Be careful that water does not enter the
●
brake master cylinder when refilling.
Water will significantly lower the boiling
point of the brake fluid and may result in
vapor lock.
4.Air bleed:
Brake system
●
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in CHAPTER 3.
5.Check:
Brake fluid level
●
Brake fluid level is under the "LOWER" level
line → Fill up.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in CHAPTER 3.
INSTALLING THE REAR BRAKE MASTER
CYLINDER
1.Install:
Copper washers 1
●
Brake hose 2
●
Union bolt 3
●
CAUTION:
When installing the brake hose onto the
brake master cylinder, make sure the brake
pipe touches the projection a as shown.
WARNING
Proper brake hose routing is essential to
insure safe machine operation. Refer to
"CABLE ROUTING".
8 - 24
CHAS
New
30 Nm (3.0 m • kg, 22 ft • lb)