Disassembling The Universal Joint - Yamaha YFM660FP Service Manual

FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR

DISASSEMBLING THE UNIVERSAL JOINT

1.Remove:
Universal joint
●
*****************************************************
Removal steps:
● Remove the circlips 1.
●
Place the U-joint in a press.
● With a suitable diameter pipe 2 beneath the
yoke 3, press the bearing 4 into the pipe as
shown.
NOTE:
It may be necessary to lightly tap the yoke with
a punch.
●
Repeat the steps for the opposite bearing.
●
Remove the yoke.
NOTE:
it may be necessary to lightly tap the yoke with
a punch.
*****************************************************
2.Remove:
Universal joint yoke
●
Use a universal joint holder 1.
Universal joint holder:
P/N. YM-04062, 90890-04062
7 - 9
DRIV