Security Camera King NVR-ELC-16 User Manual page 17

Play Next
Up/Down
Left/Right
ESC
Enter
Assistant
Record
Window switch
USB2.0 port
Record light
Power indication
light
HDD abnormal
indication light
Network abnormal
indication light
IR Receiver
,
,
ESC
ENTER
Fn
Manually stop/start recording, working with direction keys
REC
or numeral keys to select the recording channel.
Click it to switch one-window/multiple-window.
Mult
To connect USB2.0 storage device, USB2.0 mouse,
burner and etc.
For 4/8/16 channel device: indication light on means that
1-16
the channel is in recording.
Power indication light.
Power
HDD error occurs or HDD capacity is below specified
HDD
threshold value, the light becomes red to alert you.
Network error occurs or there is no network connection,
Net
the light becomes red to alert you.
It is to receive the signal from the remote control.
IR
In playback mode, playback the next video
Activate current control, modify setup, and then move
up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Shift current activated control, and then move left and
right.
When playback, click these buttons to control
playback bar.
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor
mode.
Confirm current operation
Go to default button
Go to menu
One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
Backspace function: in numeral control or text control,
press it for 1.5 seconds to delete the previous
character before the cursor.
In motion detection setup, working with Fn and
direction keys to realize setup.
In text mode, click it to switch between numeral,
English character (small/capitalized) and etc.
In HDD management interface, you can click it to
switch HDD record information and other information
(Menu prompt)
Realize other special functions.
28