1. Manuals
  2. Brands
  3. Security Camera King Manuals
  4. Network Hardware
  5. NVR-ELT-8-POE4
  6. User manual

Security Camera King NVR-ELT-8-POE4 User Manual

8ch nvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Embodied in a powdered white sleek small form casing, this unit can house one individual hard drive up to a 4TB. Our NVR o ers you a variety of recording resolutions,
adjustable frame rates, interchangeable on all of our channels. Fitted with a dual-core embedded processor, two 2.0 USB ports, a Gigabit Ethernet port and three indicator
lights for quick analysis of unit operation makes this device a highly desirable design.
Rejoice as you traverse through familiar terrain with the GUI interface as it remains the same across our entire line. Customers new and old, nd navigating through the menu
functions easily with this user friendly OSD menus and options. Record and watch the footage with dual-stream and optional settings like regular record (24/7), motion and
alarm or utilize all methods based on a schedule per your choice.
Utilize additional features for preservation of your data footage. Our NVR is equipped with valuable network features like FTP uploads, NTP synchronization, self-contained
DDNS, and more. By setting up the FTP you can back-up your recordings to an o site location, ensuring your data is obtainable for review should your NVR be damaged,
stolen or destroyed.
We take great pride in our products and services and we're sure you'll be amazed with this unit. We even back it up with a 3 year warranty and lifetime 100% free technical
support with this device. Contact our support team with your questions, comments or problems and will be more than happy to assist you. Most of the time we can remotely
help you via a computer with our remote support software.
3
yr
1080p
Resolution
Warranty
8
NVR's - Manual
CH
UP TO
8 CAMERAS
Motion
Activated
Recording
NVR-ELT-8
NVR-ELT-8-POE4

Advertisement

Table of Contents
loading

Related Manuals for Security Camera King NVR-ELT-8-POE4

Summary of Contents for Security Camera King NVR-ELT-8-POE4

  • Page 1 NVR’s - Manual NVR-ELT-8 UP TO 1080p NVR-ELT-8-POE4 8 CAMERAS Motion Resolution Activated Warranty Recording Embodied in a powdered white sleek small form casing, this unit can house one individual hard drive up to a 4TB. Our NVR o ers you a variety of recording resolutions, adjustable frame rates, interchangeable on all of our channels.

  • Page 2: Table Of Contents

    Table of Contents Features and Specifications .......................1 Overview............................1 Features............................1 Specifications..........................2 1.3.1 21/21-P/21-S Series......................2 8ch Series 1.3.2 ....................3 32/32-P/32-8P Series ......................5 1.3.3 1.3.4 32V/32V-P Series ........................7 1.3.5 34V/34V-P Series ........................8 38 Series..........................9 1.3.6 1.3.7 50 Series..........................11 1.3.8 52/52-P Series ........................13 58 Series..........................14 1.3.9 Front Panel and Rear Panel ......................17 Front Panel..........................17...
  • Page 3 Bidirectional talk .........................46 2.4.1 Device-end to PC-end ......................46 2.4.2 PC-end to the device-end ....................47 Mouse Operation........................47 HDD Installation..........................49 8ch Series ......................49 32/32-P/32-8P/52/52-P Series ....................50 32V/32V-P/34V/34V-P Series ....................50 50 Series............................51 38 /58 Series..........................52 Network Connection ..........................53 GUI Operation.............................54 Login.............................54 Right Click Menu ........................56 Main Menu...........................57 Search &...
  • Page 4 5.6.3.1 Quick Setup.........................74 5.6.4 RS232 ...........................75 5.6.5 Network ..........................75 5.6.5.1 Network Setting ......................77 5.6.5.2 IP Filter.........................77 5.6.5.3 NTP Setup ........................78 5.6.5.4 Multicast........................79 5.6.5.5 PPPoE..........................80 5.6.5.6 DDNS ...........................80 5.6.5.7 UPNP ...........................82 5.6.5.8 WIFI Setting.........................83 5.6.5.9 Email ..........................85 5.6.5.10 FTP..........................86 5.6.5.11 Alarm center........................88 5.6.5.12 SNMP ...........................88 5.6.5.13...
  • Page 5 Shutdown...........................115 Quick Configuration Tool.........................117 Overview............................117 Operation...........................117 Web Operation..........................120 General Introduction ........................120 7.1.1 Preparation .........................120 Log in...........................121 7.1.2 LAN Mode..........................122 Monitor Channel Menu Tree ....................123 7.2.1 7.2.2 System Menu ........................126 7.2.3 Monitor Window Switch ....................126 7.2.4 PTZ Control ........................126 Color and More Setup.......................128 7.2.5 WAN Login ..........................129 Configuration..........................131...
  • Page 6 7.4.3.7 Auto Maintenance ....................158 7.4.3.8 Remote device......................159 7.4.3.9 Preview Control ......................160 7.4.4 Additional Function......................161 7.4.4.1 IPC Config .........................161 7.4.4.2 Auto register......................163 7.4.4.3 Mobile Config ......................163 7.4.4.4 WIFI Config .......................164 Search............................165 Alarm ............................168 About ............................170 Log out ............................170 FAQ ..............................171 Appendix A HDD Capacity Calculation..................176 Appendix B Compatible SATA HDD..................177 Appendix C Compatible USB2.0 List ..................182 Appendix D Compatible Displayer List..................184...
  • Page 7 Welcome Thank you for purchasing our network video recorder! This user’s manual is designed to be a reference tool for your system. Please open the accessory bag to check the items one by one in accordance with the list below. Contact your local retailer ASAP if something is missing or damaged in the bag.

  • Page 8: Installation Environment

    Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2．Transportation security Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
  • Page 9 Check the following accessories after opening the box： Please refer to the packing list in the box * viii...

  • Page 10: Features And Specifications

    1 Features and Specifications 1.1 Overview This series NVR is a high performance network video recorder. This series product support local preview, multiple-window display, recorded file local storage, remote control and mouse shortcut menu operation, and remote management and control function. This series product supports centre storage, front-end storage and client-end storage.

  • Page 11: Specifications

    • Support network backup, USB2.0 record backup function, the recorded Backup files can be saved in network storage server, peripheral USB2.0 device, burner and etc. • Network Supervise NVR configuration and control power via Ethernet. • Management Support management via WEB. •...

  • Page 12: 8Ch Series

    Working 0℃～+50℃ Temperature 10℅－90℅ Working Humidity 86kpa－106kpa Air pressure Dimension 205mm×205mm×52mm Weight 0.5~1KG（Exclude HDD） Desk installation Installation 8ch Series 1.3.2 Specifications Parameter NVR-ELT-8 NVR-ELT-8-POE4 System Max support 16-ch standard definition with the transmission rate of 2Mbps for each Resources channel;...
  • Page 13 8-channel 720P, with the transmission rate of 4Mbps for each channel; 4-channel 1080P, with the transmission rate of 8Mbps for each channel; Support 20 online users at the same time, The image delay time of each channel is under 500ms. Operation Embedded Linux real-time operation system System...

  • Page 14: 32/32-P/32-8P Series

    No on/off button. Connect to the power cable to boot up. Power Button Power Button Remote Control Support IR remote control Receiver Clock Built-in clock. One power status indication light. Indication Light One network status indication light. One HDD status indication light. Power ＜12W(Exclude HDD) Consumption...
  • Page 15 Video Input 4/8/16-ch network compression video input HDMI 1-ch HDMI output. 1-ch bidirectional audio input Audio Input Audio Output 1-ch bidirectional talk output. Window Split 4/8/9/16-window Multiple-chann Max 16-channel D1/8-channel 720P/4-channel 1080P playback. el Playback 4/8/16-ch series product support 4/8/16-ch alarm input respectively. Alarm Input 3-ch alarm output Alarm Output...

  • Page 16: 32V-P Series

    Air pressure 86kpa－106kpa 375mm×287mm×52mm Dimension 1.5～2.5 KG（Exclude HDD） Weight Installation Desk installation/Rack installation 1.3.4 32V/32V-P Series Parameter Specifications 32V Series 32V-P Series Max support 16-ch standard definition with the transmission rate of 2Mbps for each channel; System 8-channel 720P, with the transmission rate of 4Mbps for each channel; 4-channel 1080P, with the transmission rate of 8Mbps for each channel;...

  • Page 17: 34V-P Series

    USB2.0 Port 3 peripheral USB2.0 ports. Network One RJ45 10/100M/1000Mbps self-adaptive Ethernet port. Connection One power port, power adapter. Input DC Two power ports, power adapter. Input DC Power Port 12V. 12V or DC 48V. Power Button One power button in the rear panel. Power Button One power button in the front panel.

  • Page 18: Series

    Video Input 4/8/16-ch network compression video input HDMI 1-ch HDMI output. 1-ch bidirectional audio input Audio Input Audio Output 1-channel bidirectional talk output. Window Split 4/8/9/16-window Multiple-chann Max 16-channel D1/8-channel 720P/4-channel 1080P playback. el Playback 4/8/16-ch series product support 4/8/16-ch alarm input respectively. Alarm Input 3-ch alarm output Alarm Output...
  • Page 19 Parameter Specifications 38 Series Max support 16-ch standard definition with the transmission rate of 2Mbps for each channel; 8-channel 720P, with the transmission rate of 4Mbps for each channel; 4-channel 1080P, with the transmission rate of 8Mbps for each channel; System Support 20 online users at the same time, Resources...

  • Page 20: Series

    Network One RJ45 10/100M/1000Mbps self-adaptive Ethernet ports. Connection One power port. AC100～240V 50+2% Hz Power Port One power button in the rear panel. Power Button Power Button One power button in the front panel. Remote Control One IR remote control receiver in the front panel. Receiver Built-in clock.
  • Page 21 Audio G.711a Compression 1-channel VGA analog video output. Video Output Video Input 8/16/32-ch network compression video input HDMI 1-ch HDMI output. Audio Input 1-ch bidirectional audio input Audio Output 1-ch bidirectional talk output. 1/4/8/9/16/25/36-window Window Split Multiple-chann Max 16-channel playback. el Playback 16-ch alarm input Alarm Input...

  • Page 22: 52/52-P Series

    Installation Desk installation 1.3.8 52/52-P Series Parameter Specifications 52 Series 52-P Series Max support 32-ch standard definition with the transmission rate of 2Mbps for each channel; 16-channel 720P, with the transmission rate of 4Mbps for each channel; System Resources 8-channel 1080P, with the transmission rate of 8Mbps for each channel; Support 20 online users at the same time, The image delay time of each channel is under 500ms.

  • Page 23: Series

    Connection One power port, power adapter. Input DC Two power ports, power adapter. Input DC Power Port 12V. 12V or DC 48V. Power Button One power button in the rear panel. Power Button One power button in the front panel. Remote Control Support IR remote control...
  • Page 24 Audio G.711a Compression 1-channel VGA analog video output. Video Output Video Input 8/16/32-ch network compression video input HDMI 1-ch HDMI output. Audio Input 1-ch bidirectional audio input Audio Output 1-ch bidirectional talk output. 1/4/8/9/16/25/36-window Window Split Multiple-chann Max 16-channel playback. el Playback 16-ch alarm input Alarm Input...
  • Page 25 Humidity Air pressure 86kpa－106kpa Dimension 440mm×460mm×89mm Weight 5.5～6.5 KG（Exclude HDD） Installation Desk installation...

  • Page 26: Front Panel And Rear Panel

    2 Front Panel and Rear Panel 2.1 Front Panel 8ch Series The front panel is shown as 2.1.1 in Figure 2-1. Figure 2-1 Please refer to the following sheet for detailed information. Icon Name Function The blue light becomes on when the power Power indicator light connection is OK.
  • Page 27 Shift In textbox, click this button to switch between numeral, English (Small/Capitalized), donation and etc. Enable or disable tour. Fast play Various fast speeds and normal playback. Slow play Multiple slow play speeds or normal playback. Play/Pause In backward playback or pause mode, click this button to go normal playback.

  • Page 28: Series

    Record Manually stop/start recording, working with direction keys or numeral keys to select the recording channel. Window switch Click it to switch one-window/multiple-window. Mult USB2.0 port To connect USB2.0 storage device, USB2.0 mouse, burner and etc. Record light 1-16 For 4/8/16 channel device: indication light on means that the channel is in recording.

  • Page 29: 52/52-P Series

    Alarm indication The alarm indication light becomes on once an alarm light occurred. The alarm includes local alarm, no disk and etc. Network indication The network indication light is blue and it flashes light when you connect the device to the network. USB2.0 port Connect to USB2.0 storage device,mouse, burner and etc.
  • Page 30 up and down. Down/4 Change setup. Increase/decrease numeral. Assistant function such as PTZ menu. Left/2 Shift current activated control, move left or right. Right/3 When playback, click these buttons to control playback bar. In normal playback click this button to start/pause playback. Play/Pause /5 In normal playback or pause mode, click this button to Reverse/Pause...

  • Page 31: 32V-P Series

    or numeral keys to select the recording channel. 2.1.5 32V/32V-P Series The front panel is shown as below. See Figure 2-6. Figure 2-6 Please refer to the following sheet for front panel button information. Name Icon Function Power button Power button, press this button for three seconds to boot up or shut down NVR.

  • Page 32: 34V-P Series

    Power Power indication light. indication light HDD abnormal HDD error occurs or HDD capacity is below specified threshold indication light value, the light becomes red to alert you. Network Network error occurs or there is no network connection, the light abnormal becomes red to alert you.

  • Page 33: 38/58 Series

    In motion detection setup, working with Fn and direction keys to realize setup. In text mode, click it to switch between numeral, English character (small/capitalized) and etc. In HDD management interface, you can click it to switch HDD record information and other information (Menu prompt) Realize other special functions.
  • Page 34 Fast play Various fast speeds and normal playback. Multiple slow play speeds or normal playback. Slow play In normal playback click this button to pause playback Play/Pause In pause mode, click this button to resume playback. In normal playback or pause mode, click this button to reverse Reverse/Pause playback...

  • Page 35: Rear Panel

    In real-time monitor mode it works as left/right direction key. Shuttle(outer In playback mode, counter clockwise to forward and clock ring) wise to backward. Up/down direction key. Jog(inner dial) Playback mode, turn the inner dial to realized frame by frame playback. (Only applies to some special versions.) To connect USB2.0 storage device, USB2.0 mouse, burner and USB2.0 port etc.
  • Page 36 Figure 2-10 The 21-S series rear panel is shown as below. See Figure 2-11. Figure 2-11 Please refer to the following sheet for detailed information. Port Name Connection Function 10M/100Mbps self-adaptive Ethernet port. Connect Network port to the network cable. High definition audio and video signal output port.

  • Page 37: 8Ch Series

    8ch Series 2.2.2 NVR-ELT-8 rear panel is shown as below. See Figure 2-12. Figure NVR-ELT-8-POE4 2-12 The rear panel is shown as below. See Figure 2-13. Figure 2-13 The 31-S series rear panel is shown as below. See Figure 2-14.

  • Page 38: Series

    Port Name Connection Function Network port 10M/100/1000Mbps self-adaptive Ethernet port. Connect to the network cable. HDMI High Definition High definition audio and video signal output Media port. It transmits uncompressed high definition Interface video and multiple-channel data to the HDMI port of the display device.

  • Page 39: 32-P/32-8P Series

    Port Name Connection Function HDMI High Definition Media High definition audio and video signal Interface output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. VGA video output port VGA video output port. Output analog video signal.
  • Page 40 Figure 2-17 The rear panel of the 32-8P series is shown as below. See Figure 2-18. Figure 2-18 Please refer to the following sheet for detailed information. Port Name Connection Function USB2.0 port. Connect to USB2.0 mouse. Network port 10M/100M/1000Mbps self-adaptive Ethernet port.

  • Page 41: 32V-P Series

    Port Name Connection Function NO1 to NO3 3-ch alarm 3 groups of alarm output ports. (Group 1： output port port NO1～C1,Group 2:port NO2～ C2,Group 3:port NO3～C3）).Output C1 to C3 alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • Page 42 Figure 2-19 The 32V-P rear panel is shown as below. See Figure 2-20. Figure 2-20 Please refer to the following sheet for detailed information.
  • Page 43 Port Name Connection Function USB2.0 USB2.0 port. Connect to USB2.0 mouse. Network port 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. HDMI High Definition High definition audio and video signal output Media port. It transmits uncompressed high Interface definition video and multiple-channel data to the HDMI port of the display device.

  • Page 44: 34V-P Series

    Port Name Connection Function MIC IN Audio input Bidirectional talk input port. It is to receive the port analog audio signal output from the devices such as mike phone, pickup. MIC OUT Audio output Audio output port. It is to output the analog port audio signal to the devices such as the sound box.
  • Page 45 Figure 2-22 Please refer to the following sheet for detailed information. Port Name Connection Function USB2.0 USB2.0 port. Connect to USB2.0 mouse. Network port 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. HDMI High Definition High definition audio and video signal output Media port.

  • Page 46: Series

    Port Name Connection Function there is power to the external alarm device. NO：Normal open alarm output port. C：Alarm output public end. RS485 RS485_A port. It is the cable A. You can (RS-485) connect to the control devices such as speed communication dome PTZ.
  • Page 47 Port Name Connection Function Power button Power on/off button. Power input Input AC 220V power. port MIC IN Audio input Bidirectional talk input port. It is to receive the port analog audio signal output from the devices such as mike phone, pickup. MIC OUT Audio output Audio output port.

  • Page 48: Series

    Port Name Connection Function CTRL 12V Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.
  • Page 49 Port Name Connector Function MIC OUT Audio output port Audio output port. It is to output the analog audio signal to the devices such as the sound box. Bidirectional talk output. Audio output on 1-window video monitor. Audio output on 1-window video playback. I/O port 1-16 Alarm input port...

  • Page 50: Series

    Port Name Connector Function RS232 RS232 debug It is for general COM debug to configure IP COM. address or transfer transparent COM data. （RS-422） High Definition High definition audio and video signal output port. Media Interface It transmits uncompressed high definition video HDMI and multiple-channel data to the HDMI port of the display device.

  • Page 51: 52-P Series

    Port Name Connection Function There are two groups. The first group is Alarm input I/O port port 1-8. from port 1 to port 4; the second group is from port 5 to port 8. They are to receive the signal from the external alarm source.
  • Page 52 Figure 2-26 Please refer to the following sheet for detailed information. Port Name Connection Function USB2.0 USB2.0 port. Connect to USB2.0 mouse. Network port 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. RS232 RS232 debug It is for general COM debug to configure IP COM.

  • Page 53: Series

    Port Name Connection Function port RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. Power input Input 12V DC. port Power button Power on/off button. PoE PORTS 8 PoE ports Built-in Switch supports PoE function. The 8 PoE ports series product supports total 48V 120W.
  • Page 54 Port Name Connection Function MIC IN Audio input Bidirectional talk input port. It is to receive the port analog audio signal output from the devices such as mike phone, pickup. MIC OUT Audio output Audio output port. It is to output the analog port audio signal to the devices such as the sound box.

  • Page 55: Alarm Connection

    Port Name Connection Function eSATA eSATA port External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. USB port. Connect to USB mouse. RS232(RS-422) RS232 debug It is for general COM debug to configure IP COM.

  • Page 56: Pc-End To The Device-End

    Figure 2-28 Listening Operation At the device end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the pc-end. See Figure 2-29. Figure 2-29 2.4.2 PC-end to the device-end Device Connection Connect the speaker or the pickup to the audio output port in the PC and then connect the earphone or the sound box to the first audio input port in the device rear panel.
  • Page 57 Left click When you have selected one menu item, left click mouse to view menu mouse content. Modify checkbox or motion detection status. Click combo box to pop up dropdown list In input box, you can select input methods. Left click the corresponding button on the panel you can input numeral/English character (small/capitalized).

  • Page 58: Hdd Installation

    3 HDD Installation Important： Please turn off the power before you replace the HDD. The pictures listed below for reference only. For the first time install, please be aware that whether the HDDs have been installed. You can refer to the Appendix for recommended HDD brand. Please use HDD of 7200rpm or higher.

  • Page 59: 32/32-P/32-8P/52/52-P Series

    3.2 32/32-P/32-8P/52/52-P Series 1. Loosen the screws of the 2. Fix four screws in the HDD 3. Place the HDD in accordance with upper cover and side panel. (Turn just three rounds). the four holes in the bottom. 4. Turn the device upside down 6.

  • Page 60: Series

    ③Pull the HDD knob up when you put the HDD ④Put the knob back after you insert the HDD into the box in case the knob buckle may strike to the SATA board. the front panel. 3.4 50 Series ① Use four screws to secure the HDD. Put the HDD to the HDD box at the ②...

  • Page 61: 38 /58 Series

    3.5 38 /58 Series ① Use the screwdriver to loose the screws of the rear panel and then remove the front cover. ② Put the HDD to the HDD bracket in the chassis and then line up the four screws to the four holes in the HDD.

  • Page 62: Network Connection

    4 Network Connection Please refer to Figure 4-1 for connection sample. The following figure is based on the 38 series product. Figure 4-1...

  • Page 63: Gui Operation

    5 GUI Operation Connect the device to the monitor and then connect a mouse and power cable. Click the power button at the rear panel and then boot up the device to view the analog video output. You can use the mouse to implement some GUI operation.
  • Page 64 Figure 5-2 You can overlay the corresponding date, time and channel name on each screen. You can refer to the following sheet for channel record or alarm status information. Recording status Video loss Motion detection Camera lock Preview Control The preview control function has the following features. Support preview playback.

  • Page 65: Right Click Menu

    record of current channel. Please go to the Main Menu->General to set real-time playback time. System may pop up a dialogue box if there is no such record in current channel. It is to zoom in specified zone of current channel. It supports zoom in function of multiple-channel.

  • Page 66: Main Menu

    After you logged in the device, right click mouse, you can see the short cut menu. Please see Figure 5-4. Here you can set local playback window, PTZ control, video color, search records, remote device and etc. The local playback window includes 1/4/8/9/16. You can set the detail channel amount in 1/4-window.
  • Page 67 Figure 5-6 Please refer to the following sheet for more information. Name Function Display Here is to display the searched picture or file. window Support 1/4/9/16-window playback. Here you can select to search the picture or the recorded file. You can select to play from the read-write HDD, from peripheral device or from redundancy HDD.
  • Page 68 selection In 9-window playback mode, you can switch between 1-8 and 9-16 channels. pane. In 16-window playback mode, you can switch between1-16 and 17-32 channels. The time bar will change once you modify the playback mode or the channel option. Double click it, you can view the picture/record file list of current day.
  • Page 69 │ to begin frame by frame playback. In frame by frame playback mode, click ►/ to restore normal playback. ► Slow play In playback mode, click it to realize various slow play modes such as slow play 1, slow play 2, and etc. Fast forward In playback mode, click to realize various fast play modes such as fast play 1,fast play 2 and etc.

  • Page 70: Information

    type When system is playing, you can select a zone in the window to begin motion detect. Click the motion detect button to begin play. Current button is null once the motion detect play has begun. Smart The system will take the whole play zone as the motion detect region by search default.

  • Page 71: Hdd Information

    5.5.1 HDD Information Here is to list hard disk type, total space, free space, and status. See Figure 5-8. For 32 series product there are max 2 HDDs. For 38 series product there are max 8 HDDs. ○ means current HDD is normal.. - means there is no HDD. If disk is damaged, system shows as “?”.

  • Page 72: Bps

    Type The corresponding HDD property. Total space The HDD total capacity. Free space The HDD free capacity. Status HDD can work properly or not. Bad track Display there is bad track or not. Page up Click it to view previous page. Page down Click it to view the next page.

  • Page 73: Log

    Figure 5-11 5.5.3 Log Here is for you to view system log file. System lists the following information. See Figure 5-12. Log types include system operation, configuration operation, data management, alarm event, record operation, log clear and etc. Start time/end time: Pleased select start time and end time, then click search button. You can view the log files in a list.

  • Page 74: Version

    Figure 5-13 5.5.4 Version Here is for you to view some version information. See Figure 5-14. Channel Alarm in Alarm out System version: Build Date Serial number Figure 5-14 5.5.5 Online Users Here is for you manage online users connected to the local device. See Figure 5-15. You can disconnect one user or block one user if you have proper system right.

  • Page 75: Remote Device Information

    Figure 5-15 5.5.6 Remote Device Information Here you can view the channel status of the remote device, connection log and etc. Channel status: Here you can view the IPC status of the corresponding channel such as motion detect, video loss, camera masking, alarm and etc. See Figure 5-16. Figure 5-16 Connection log: In this interface, you can search the IPC log information of the corresponding channel.

  • Page 76: Network Info

    Figure 5-17 5.5.7 Network Info In this interface, you can see network test and network load information. 5.5.7.1 Network Test Network test interface is shown as in Figure 5-18. Destination IP: Please input valid IPV4 address and domain name. Test: Click it to test the connection with the destination IP address. The test results can display average delay and packet loss rate and you can also view the network status as OK, bad, no connection and etc.

  • Page 77: Network Load

    Figure 5-18 5.5.7.2 Network Load Network load is shown as in Figure 5-19. Here you can view the follow statistics of the device network adapter. Here you can view information of all connected network adapters. The connection status is shown as offline if connection is disconnected.

  • Page 78: General

    Figure 5-20 Important Please note you need to have the proper right to implement the following operation. 5.6.1 General General setting includes the following items. See Figure 5-21. System time: Here is for you to set system time Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY. Date separator: There are three denotations to separate date: dot, beeline and solidus.
  • Page 79 Holiday setting: Click it you can see an interface shown as in Figure 5-24. Here you can set holiday date. Please go to the Holidays Period interface to set the holiday date record setup. When you enable Holiday settings and schedule setup at the same time, holiday setting has the priority.

  • Page 80: Encode

    Figure 5-22 Figure 5-23 Figure 5-24 Figure 5-25 5.6.2 Encode Encode setting includes the following items. See Figure 5-26. Please note some series do not support extra stream. Channel: Select the channel you want. Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm.
  • Page 81 Resolution: The mainstream resolution type is IPC’s encoding config. Generally there is D1/720P/1080P. Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode. Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.

  • Page 82: Schedule

    Figure 5-27 Figure 5-28 Figure 5-29 5.6.3 Schedule In the main menu, from setting to schedule, you can go to schedule menu. See Figure 5-30. Channel: Please select the channel number first. You can select “all” if you want to set for the whole channels.

  • Page 83: Quick Setup

    menu->Advanced->HDD Management). Please note this function is null if there is only one HDD. Snapshot: You can enable this function to snapshoot image when an alarm occurs. Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm. Holiday: Highlight the button here, the holiday settings in General interface (Chapter 5.6.1) becomes activated.

  • Page 84: Rs232

    Figure 5-31 5.6.4 RS232 RS232 interface is shown as below. There are five items. See Figure 5-32. Function: There are various devices for you to select. Console is for you to use the COM or mini-end software to upgrade or debug the program. The control keyboard is for you to control the device via the special keyboard.
  • Page 85 IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP address format and you can access via them. MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN.

  • Page 86: Network Setting

    input value shall be 128-digit. It shall not be left in blank. After completing all the setups please click save button, system goes back to the previous menu. Figure 5-33 5.6.5.1 Network Setting Network setting interface is shown as in Figure 5-34. Please draw a circle to enable corresponding function and then double click current item to go to setup interface.

  • Page 87: Ntp Setup

    Start address/end address: Select one type from the dropdown list, you can input IP address in the start address and end address. Now you can click Add IP address or Add IP section to add. For the newly added IP address, it is in enable status by default. Remove the √ before the item, then current item is not in the list.

  • Page 88: Multicast

    Here is a sheet for your time zone setup. City /Region Name Time Zone London GMT+0 Berlin GMT+1 Cairo GMT+2 Moscow GMT+3 New Deli GMT+5 Bangkok GMT+7 Beijing (Hong Kong) GMT+8 Tokyo GMT+9 Sydney GMT+10 Hawaii GMT-10 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7...

  • Page 89: Pppoe

    -224.0.0.0-239.255.255.255 -“D” address space The higher four-bit of the first byte=”1110” Reserved local multiple cast group address -224.0.0.0-224.0.0.255 -TTL=1 When sending out telegraph -For example 224.0.0.1 All systems in the sub-net 224.0.0.2 All routers in the sub-net 224.0.0.4 DVMRP router 224.0.0.5 OSPF router 224.0.0.13 PIMv2 router...
  • Page 90 You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In other words, this PC is a DNS (domain name server). In network DDNS, please select DDNS type and highlight enable item. Them please input your PPPoE name you get from you IPS and server IP (PC with DDNS ) .

  • Page 91: Upnp

    Domain name：There are two modes: Default domain name and customized domain name. Except default domain name registration, you can also use customized domain name (You can input your self-defined domain name.). After successful registration, you can use domain name to login installed of the device IP.

  • Page 92: Wifi Setting

    Figure 5-40 Figure 5-41 5.6.5.8 WIFI Setting You can view the WIFI connection status in the Network Setting interface. See Figure 5-42. You can view current connection status and IP address if there is a connection. Figure 5-42 The WIFI interface is shown as below. See Figure 5-43.
  • Page 93 Auto connect WIFI: Check the box here, system automatically connects to the previous WIFI hotspot. Refresh: You can click it to search the hotspot list again. It can automatically add the information such as the password if you have set it before. Disconnect: Here you can click it to turn off the connection.

  • Page 94: Email

    Figure 5-45 WIFI working status: Here you can view current connection status. Please note: After successful connection, you can see WIFI connection icon at the top right corner of the preview interface. When the hotspot verification type is WEP, system displays as AUTO since the device can not detect its encryption type.

  • Page 95: Ftp

    Title: Please input email subject here. System support English character and Arabic number. Max 32-digit. Receiver: Please input receiver email address here. System max supports 3 email boxes. SSL enable: System supports SSL encryption box. Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. Health email enable: Please check the box here to enable this function.
  • Page 96 Figure 5-49 You can use a PC or FTP login tool to test setup is right or not. For example, you can login user ZHY to F TP://10.10.7.7 and then test it can modify or delete H 1 4 0 H 1 4 0 H 1 4 0 H T U folder or not.

  • Page 97: Alarm Center

    Figure 5-51 Figure 5-52 5.6.5.11 Alarm center Interface is pre-reserved for the users to develop this function. 5.6.5.12 SNMP SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic network management frame of the network management system. The SNMP widely used in many environments.

  • Page 98: Auto Register

    Please enable the SNMP function. Use the corresponding software tool (MIB Builder and MG-SOFT MIB Browser. You still need two MIB file: BASE-SNMP-MIB, NVR-SNMP-MIB) to connect to the device. You can get the device corresponding configuration information after successfully connection. Please follow the steps listed below to configure.

  • Page 99: Alarm

    4) Now you can boot up the proxy server. When you see the network status is Y, it means your registration is OK. You can view the proxy server when the device is online. Important The server IP address can also be domain. But you need to register a domain name before you run proxy device server.
  • Page 100 Alarm output: The number here is the device alarm output port. You can select the corresponding ports(s) so that system can activate the corresponding alarm device(s) when an alarm occurred. Latch: When the anti-dither time ended, the channel alarm you select in the alarm output may last the specified period.
  • Page 101 Figure 5-55 Figure 5-56 Figure 5-57...

  • Page 102: Detect

    Figure 5-58 For the 32-channel series product, the alarm interface and PTZ setup is shown as below. See Figure 5-59 and Figure 5-60. Figure 5-59 Figure 5-60 5.6.7 Detect Go to Detect Menu In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 5-61.There is three detection types: motion detection, video loss, camera masking.

  • Page 103: Motion Detect

    detection region setup. You can see motion detect icon if current channel has enabled motion detect alarm. You can drag you mouse to set motion detect region without Fn button. Please click OK button to save current region setup. Right click mouse to exit current interface. 5.6.7.1 Motion Detect Detection menu is shown as below.
  • Page 104 save button, system goes back to the previous menu. Note: In motion detection mode, you can not use copy/paste to set channel setup since the video in each channel may not be the same. In Figure 5-62, you can left click mouse and then drag it to set a region for motion detection. Click Fn to switch between arm/withdraw motion detection.

  • Page 105: Video Loss

    Figure 5-64 Figure 5-65 5.6.7.2 Video Loss In Figure 5-61, select video loss from the type list. You can see the interface is shown as in Figure 5-66.This function allows you to be informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message function. You can refer to chapter 5.6.7.1Motion detect for detailed information.

  • Page 106: Ptz

    environments light change, the system can alert you to guarantee video continuity. Camera masking interface is shown as in Figure 5-67. You can enable alarm output channel and then enable show message function. You can refer to chapter 5.6.7.1Motion detect for detailed information.
  • Page 107 Address: Default address is 1. Baud rate: Select corresponding baud rate. Default value is 9600. Data bit: Select corresponding data bits. Default value is 8. Stop bit: Select corresponding stop bits. Default value is 1. Parity: There are three options: odd/even/none. Default setup is none. Figure 5-68 If you are connecting to network PTZ, the PTZ type shall be remote.

  • Page 108: Display

    Please click icon to adjust zoom, focus and iris. Figure 5-70 In Figure 5-70, please click direction arrows to adjust PTZ position. There are total 8 direction arrows. Figure 5-71 Here is a sheet for you reference. Name Function function Shortcut Function function...

  • Page 109: Default

    Figure 5-72 In Figure 5-72, click modify button after channel. You can see an interface shown as in Figure 5-73. Please note all your modification here applies to local end only. You need to refresh web or client-end to get the latest channel name. System max support 25-digital character. Figure 5-73 5.6.10 Default Click default icon, system pops up a dialogue box.

  • Page 110: Remote Device

    Display Channel name Please highlight icon to select the corresponding function. After all the setups please click OK button, system goes back to the previous menu. Warning! System menu color, language, time display mode, video format, IP address, user account will not maintain previous setup after default operation! 5.6.11 Remote Device Important...
  • Page 111 Figure 5-76 The remote device interface is shown as in Figure 5-77. IP search: Click it to search IP address. Add: Click it to connect to the selected device and add it to the Added device list. Support Batch add. Show filter: You can use it to display the specified devices from the added device.
  • Page 112 Figure 5-77 Figure 5-78 Click the Manual Add button; you can go to the following interface. See Figure 5-79. This series product max supports 32-channel standard definition video/high definition non-real-time video and the transmission rate is 1Mbps per channel. It can also max supports 4-channel high definition video and the transmission rate is 8Mbps.

  • Page 113: Short-Cut Menu

    Total resources:400/480fps@D1,200/240fps@720P.100/120@1080P. 8-ch series Max support 8-channel video. Total resources:400/480fps@D1,200/240fps@720P.100/120@1080P. 16-ch series Max support 16-channel video. Total resources:400/480fps@D1,200/240fps@720P.100/120@1080P. 32-ch series Max support 32-channel standard definition video. Support 8-channel 1080p/5Mbps (extra stream D1/1Mbps), 16-channel 720p/2Mbps (extra CIF/640kbps), 32-channel D1/1Mbps. This series product supports the IPC from many popular manufactures such as Sony, Hitachi, dynacolor, Axis, Samsung, arecont, Dahua, onvif and custom type.

  • Page 114: Advanced

    Figure 5-80 Figure 5-81 5.7 Advanced Double click advanced icon in the main window, the interface is shown as below. See Figure 5-82.There are total eight function keys: HDD management, alarm output, abnormity, manual record, account, auto maintenance, TV adjust and video matrix.

  • Page 115: Hdd Management

    Figure 5-82 5.7.1 HDD Management Here is for you to view and implement hard disk management. See Figure 5-83. You can see current HDD type, status, capacity and record time. When HDD is working properly, system is shown as O. When HDD error occurred, system is shown as X. Alarm set: Click alarm set button, the interface is shown as below.
  • Page 116 Figure 5-84 For the HDD group setup operation, please note: Each channel’s records can be stored into the specified HDD Group. Each HDD Group is corresponding to several hard disks, while one hard disk is only included in one HDD Group. Each channel is only corresponding with one HDD Group, while one HDD Group can store records from several channels.

  • Page 117: Abnormality

    Figure 5-85 Channels Setting Click the button named with “Channels Settings” at the top right corner of the Figure 5-83, system will pop up an interface shown as in Figure 5-86. You can set HDDs for main stream, extra stream and snap pictures respectively. The main stream and extra stream of one channel can be saved to different groups.

  • Page 118: Alarm Output

    Event type: There are several options for you such as disk error, no disk, disconnection, IP conflict and etc. Alarm output: Please select alarm activation output port (multiple choices). Latch: Here you can set corresponding delaying time. The value ranges from 10s-300s. System automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled.

  • Page 119: Manual Record Menu

    Note: You need to have proper rights to implement the following operations. Please make sure the HDD has been properly installed. 5.7.4.1 Manual record menu Right click mouse or in the main menu, Advanced->Manual Record. Manual record menu is shown as in Figure 5-89. 5.7.4.2 Basic operation There are three statuses: schedule/manual/stop.

  • Page 120: Stop All Channel Recording

    All channel schedule record Please highlight “ALL” after “Schedule”. See Figure 5-91. When system is in schedule recording, all channels will record as you have previously set (Main menu->Setting->Schedule). The corresponding indication light in front panel will turn on. Figure 5-91 All channel manual record Please highlight “ALL”...

  • Page 121: Account

    Figure 5-93 5.7.5 Account Here is for you to implement account management. See Figure 5-94. Here you can: Add new user Modify user Add group Modify group Modify password. For account management please note: For the user account name and the user group, the string max length is 6-byte. The backspace in front of or at the back of the string is invalid.

  • Page 122: Modify Password

    Figure 5-94 5.7.5.1 Modify Password Click password button, the interface is shown as in Figure 5-95. Here you can modify account password. Please select the account from the dropdown list, input the old password and then input the new password twice. Click the Save button to confirm current modification. For the users of user account right, it can modify password of other users.

  • Page 123: Add/Modify User

    Figure 5-96 5.7.5.3 Add/Modify User Click add user button, the interface is shown as in Figure 5-97. Please input the user name, password, select the group it belongs to from the dropdown list. Then you can check the corresponding rights for current user. For convenient user management, usually we recommend the general user right is lower than the admin account.

  • Page 124: Config Backup

    Figure 5-98 5.7.7 Config Backup The configuration file backup interface is shown as below. See Figure 5-99. This function allows you to copy current system configuration to other devices. It also supports import, create new folder, delete folder and etc function. Figure 5-99 5.8 Shutdown Double click shutdown button, system pops up a dialogue box for you to select.
  • Page 125 Figure 5-100...

  • Page 126: Quick Configuration Tool

    6 Quick Configuration Tool 6.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 6.2 Operation Double click the “ConfigTools.exe”...
  • Page 127 Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 6-3. Figure 6-3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 6-1), please select a device IP address and then double click it to open the login interface.
  • Page 128 Figure 6-5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.

  • Page 129: Web Operation

    7 Web Operation 7.1 General Introduction The device web provides channel monitor menu tree, search, alarm setup, system setup, PTZ control and monitor window. Important The following operation is based on 16-channel series device. For the 32-channel series product, there is 32-channel option. 7.1.1 Preparation Before log in, please make sure: Network connection is right...

  • Page 130: Log In

    If it is your second time to insert the PoE, system can check the saved MAC address according to <Channel>---<IPC mac> map to make sure current IPC has connected or not. If system finds the previous information and the channel is idle, system can map it to the previously used channel.

  • Page 131: Lan Mode

    Figure 7-2 IE Safety Setup After installation, the interface is shown as below. See Figure 7-3. Figure 7-3 Login interface Please input your user name and password. Default factory name is admin and password is admin. Note: For security reasons, please modify your password after you first login. 7.2 LAN Mode...

  • Page 132: Monitor Channel Menu Tree

    For the LAN mode, after you logged in, you can see the main window. See Figure 7-4. ② ③ ① ④ ⑤ ⑥ Figure 7-4 Main Interface There are six sections: Section 1: Monitor channel menu tree Section 2: System menu Section 3: PTZ control Section 4: Video setup and other setup Section 5: Preview window...
  • Page 133 Figure 7-5 Monitor Channel Menu Tree Please refer to the following sheet for detailed information. Parameter Function CAM 1 to CAM channel 1 to channel 16 Open all /close Click this button to open all video channels. Once all video channels are open, it becomes close all button. Start Dialogue You can click this button to enable audio talk.
  • Page 134 The Web can playback the saved (Extension name is dav) files in Local play the PC-end. Click local play button, system pops up the following interface for you to select local play file. See Figure 7-6. Figure 7-6 Refresh Click this button to refresh monitor channel name. Please left click one monitor to view real-time video, the monitor window is shown as in Figure 7-7.

  • Page 135: System Menu

    Resize or switch to full screen mode. Change show mode When you click local record button, the system begins Local record recording. The recorded file is saved to system folder: \ RecordDownload(default). You can snapshoot important video. All images are Snapshot memorized in system folder: \ picture download (default).
  • Page 136 You can click this icon to display or hide the PTZ control platform. Figure 7-10 PTZ Interface Click PTZ set button, the interface is shown as in Figure 7-11. Figure 7-11 PTZ Setup...

  • Page 137: Color And More Setup

    Please refer to the following sheet for PTZ setup information. Parameter Function Move the camera to you desired location and then click left limit Scan button. Then move the camera again and then click right limit button to set a right limit. Use direction keys to move the camera to your desired location and Preset then input preset value.

  • Page 138: Wan Login

    operation here It is to adjust monitor video contrast ness. applies to WEB end only. It is to adjust monitor video saturation. It is to adjust monitor video hue. Reset Restore system default value. Click more button, the interface is shown as in Figure 7-13. Figure 7-13 Color and More Please refer to the following sheet for detailed information.
  • Page 139 Figure 7-14 Please refer to the following contents for LAN and WAN login difference. 1) In the WAN mode, system opens the main stream of the first channel to monitor by default. The open/close button on the left pane is null. 2) You can select different channel and different monitor mode at the bottom of the interface.

  • Page 140: Configuration

    main stream. A stands for 4) When you switch from Monitor to Search or Configuration, system pops a dialogue box asking you leave current interface or not. See Figure 7-16.Click the OK button, system will close current monitor window. For example, you click the Config button when you are monitoring, system pos up a following dialogue.

  • Page 141: Hdd Information

    Figure 7-17 Version Information 7.4.1.2 HDD information Here you can view local storage status such as free capacity and total capacity. See Figure 7-18. Figure 7-18 HDD Information 7.4.1.3 Log Here you can view system log. See Figure 7-19...

  • Page 142: System Configuration

    Figure 7-19 Log Please refer to the following sheet for log parameter information. Parameter Function Log types include: system operation, configuration operation, data Type management, alarm event, record operation, user management, log clear and file operation. Set time to start search. Start time Set time to finish search Finish time...
  • Page 143 Figure 7-20 General Setup Figure 7-21 DST Figure 7-22 DST Please refer to the following sheet for detailed information. Parameter Function Here is for you to modify system time. Please click Save button after System Time your completed modification Sync PC You can click this button to save the system time as your PC current time.

  • Page 144: Encode

    Please select separator such as – or /. Data Separator There are two options: 24-H and 12-H. Time Format Here you can set day night save time begin time and end time. See Figure 7-21and Figure 7-22. Language Here you can view the system current language. You can select from the dropdown list.

  • Page 145: Schedule

    For the main stream, recorded file only contains video by default. You need to draw a circle here to enable audio function. Audio / video For extra stream, you need to draw a circle to select the video first and then select the audio if necessary.
  • Page 146 Figure 7-25 Schedule Time Figure 7-26 Copy Figure 7-27 Please refer to the following sheet for detailed information. Parameter Function Please select a channel first. Channel...

  • Page 147: Rs232

    Parameter Function Pre-record Please input pre-record value here. When alarm record or motion detection record occurs, system can record the several seconds video before activating the record operation into the file. (Depends on data size). Setup In Figure 7-24, click set button, you can go to the corresponding setup interface.

  • Page 148: Network

    Parameter Function RS232 There is only one option COM 01, corresponding to RS232. Console is for debug. Function Control keyboard: Switch between RS232 and control keyboard. Network keyboard: COM control protocol. You can use network keyboard to control NVR via COM. Transparent COM: Network user can communicate with RS232 COM device.
  • Page 149 Parameter Function MAC Address The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It is read-only. IP Address Here you can use up/down button ( ) or input the corresponding number to input IP address.
  • Page 150 Parameter Function Remote PPPOE Input the user name and password which ISP(Internet service supplier) host provided and chose enable. Reboot system after configuration is saved and the device will auto connect to Internet. The IP address is the WAN IP. There are two conditions for reboot, 1.
  • Page 151 Parameter Function Input email subject here. Max 32-digit. Subject Input receiver email address here. Max input three addresses. Address Please input the send interval value here. Interval DDNS The DDNS interface is shown as in Figure 7-32. Figure 7-32 DDNS Please refer to the following sheet for detailed information.
  • Page 152 works with the device from the manufacturer so that it can add the extension function. 2) Function Introduction The private DDNS client has the same function as other DDNS client end. It realizes the bonding of the domain name and the IP address. Right now, current DDNS server is for our own devices only.
  • Page 153 Figure 7-34 NAS Setup Please refer to the following sheet for detailed information. Parameter Function Please select network storage protocol and then enable NAS enable NAS function. The network storage protocol includes FTP. Server IP Input remote storage server IP address. Input Remote storage server port number.
  • Page 154 Here you can realize network time synchronization. Please enable current function and then input server IP, port number, time zone and time. Figure 7-35 NTP Please refer to the following sheet for detailed information. Parameter Function Enable Enable NTP function or not. Server IP Server IP address Port...
  • Page 155 Figure 7-36 Alarm Centre UNPN Go to the UPnP interface, you can see an image is shown as in Figure 7-37. It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPNP item. Figure 7-37 UNPN SNMP The SNMP interface is shown as in Figure 7-38.

  • Page 156: Alarm

    Please refer to chapter 5.6.5.12 SNMP for detailed information. Figure 7-38 SNMP 7.4.2.6 Alarm Alarm setup interface is shown as in Figure 7-39. Figure 7-39 Alarm Setup...
  • Page 157 Figure 7-40 PTZ Setup Figure 7-41 Please refer to the following sheet for detailed information. Parameter Function Event type: There are four types. Local input/network input/IPC Event Type external/IPC offline alarm. Local input alarm: The alarm signal system detects from the alarm input port.

  • Page 158: Detect

    Parameter Function There are two options: normal open and normal close. NO becomes Type activated in low voltage, NC becomes activated in high voltage. Period Alarm record function becomes activated in the specified periods. There are six periods in one day. Please draw a circle to enable corresponding period.
  • Page 159 signal which meets the senility standard that is previously set. See Figure 7-42.

  • Page 160: Ptz

    Figure 7-42 Detect Please refer to the following sheet for detailed information. Parameter Function Event type Motion detect, video loss and video masking Select a channel from the dropdown list to set motion detect, video loss and vid Channel masking function. Sensitivity System supports 6 levels.

  • Page 161: Default & Backup

    Please note, before operation please make sure you have set speed dome address and the NVR and speed dome connection is OK. Figure 7-43 PTZ Please refer to the following sheet for detailed information. Parameter Function You can select monitor channel from the dropdown list. . Channel Select the corresponding dome protocol.(such as PELCOD) Protocol...

  • Page 162: Advanced

    Figure 7-44 Default and Backup Please refer to the following sheet for detailed information. Parameter Function Select All Restore factory default setup. Export Export system configuration to local PC. Configuration Import Import configuration from PC to the system. Configuration 7.4.3 Advanced 7.4.3.1 HDD Management Please select the storage device first and then you can see the items on your right become valid.

  • Page 163: Abnormity

    Please refer to the following sheet for detailed information. Parameter Function Format Clear data in the HDD. Read/write Set current HDD as read/write Read only Set current HDD as read. Redundant Set current HDD as redundant HHD. Recover Fix the HDD error. Right now the device does not support this function.

  • Page 164: Alarm I/O

    Parameter Function Event The abnormal events include: no disk, no space, disk error, offline, IP Type conflict. You need to draw a circle to enable this function. Threshold: It refers to the HDD free space threshold. Normal The corresponding alarm output channel when an alarm occurs. The alarm output channel may vary.

  • Page 165: Record

    Please refer to the following sheet for detailed information. Parameter Function Alarm output The alarm output channel may vary. The interface here is for reference only. Please click the corresponding number and then click the trigger button. Trigger Enable/disable alarm output. Please note once you activate an alarm manually, you need to click the output channel number again and then click trigger button to disable it.
  • Page 166 Figure 7-50 Account Figure 7-51 Add user Please refer to the following sheet for detailed information. Parameter Function User Input the user name of the new established account. Reusable The reusable account means that this account can be used in more than one PC at the same time.

  • Page 167: Snapshot

    Password Input the password of the new established account. Confirm Input the password of the new established account again. Group Select the group which the new account belongs to. Memo Memo about the new account Authority/All User can select all to entitle this account to all authorities or set authority of each item respectively.

  • Page 168: Remote Device

    Figure 7-53 Auto Maintenance 7.4.3.8 Remote device Remote device interface is shown as in Figure 7-54. Figure 7-54 Remote device...

  • Page 169: Preview Control

    Figure 7-55 Manual Add Please refer to the following sheet for detailed information. Parameter Function Remote device Here you can see searched remote device name, IP address, TCP port information and manufacturer name. Channel Please select the local device channel number to connect to the remote device.

  • Page 170: Additional Function

    Figure 7-56 Preview Control 7.4.4 Additional Function 7.4.4.1 IPC Config IPC configuration interface is shown as in Figure 7-57. Here you can set gain, iris, brightness, contrastness, hue, saturation BLC and etc of the network camera. Figure 7-57 IPC Config Please refer to the following sheet for detailed information.
  • Page 171 Parameter Function Brightness It is to adjust monitor window bright. The value ranges from 0 to 100. The default value is 50. The larger the number, the bright the video is. When you input the value here, the bright section and the dark section of the video will be adjusted accordingly.

  • Page 172: Auto Register

    Mirror It is to switch video left and right limit. This function is disabled by default. Flip It is to switch video up and bottom limit. This function is disabled by default. Please note the video resolution shall be 720P or lower when it is to flip 90°.

  • Page 173: Wifi Config

    Figure 7-59 Mobile Setup 7.4.4.4 WIFI Config The WIFI interface is shown as in Figure 7-60. Here you can view WIFI connection status. System displays as no connection if there is no connection. You can view connection status and IP address if there is a connection. See Figure 7-61.

  • Page 174: Search

    Figure 7-61 Please refer to the following sheet for detailed information. Parameter Function Refresh Search hotspot again and system can automatically add the information such as password (If there is any record of the hotspot.) WIFI working Here you can view current connection status. information You can view connection status and IP address if there is a connection.
  • Page 175 Figure 7-62 Then please click search button, you can see the corresponding files in the list. See Figure 7-61. Figure 7-63 Select the file(s) you want to download and then click download button, system pops up a dialogue box shown as in F igure 7-62, then you can specify file name and path to download the X 4 8 0 H 4 8 0 H 4 8 0 H file(s) to your local pc.
  • Page 176 Figure 7-64 Load more It is for you to search record or picture. You can select record channel, record type and record time to download. See Figure 7-65. Figure 7-65 In Figure 7-65, there is a remote back pane at the left bottom of the pane. It allows you to backup the record or picture to your local USB2.0 storage media via the Web remotely.

  • Page 177: Alarm

    Figure 7-66 Now you can see system begins download and the download button becomes stop button. You can click it to terminate current operation. At the bottom of the interface, there is a process bar for your reference. 7.6 Alarm Click alarm function, you can see an interface is shown as in Figure 7-67.
  • Page 178 Figure 7-67 Alarm Please refer to the following sheet for detailed information. Type Parameter Function Alarm Video loss System alarms when video loss occurs. Type Motion detection System alarms when motion detection alarm occurs, Disk full System alarms when disk is full. Disk error System alarms when disk error occurs.

  • Page 179: About

    Type Parameter Function Sound pop up System sends out alarm sound when an alarm occurs. You can specify as you wish. Path Here you can specify alarm sound file. 7.7 About Click about button, you can view the web information. See Figure 7-68. Figure 7-68 About 7.8 Log out Click log out button, you can go back to log in interface.

  • Page 180: Faq

    8 FAQ 1. Device can not boot up properly. There are following possibilities: Input power is not correct. Power connection is not correct. Power switch button is damaged. Program upgrade is wrong. HDD malfunction or something wrong with HDD ribbon. Seagate DB35.1，DB35.2，SV35 or Maxtor 17-g has compatibility problem.
  • Page 181 Device color or brightness setup is not correct. 6. Can not search local records. There are following possibilities: HDD ribbon is damaged. HDD is broken. Upgraded program is not compatible. The recorded file has been overwritten. Record function has been disabled. 7.
  • Page 182 PTZ decoder and device address is not compatible. When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable. The distance is too far. 12.
  • Page 183 System uses too much CPU resources. Please stop record first and then begin backup. Data amount exceeds backup device capacity. It may result in burner error. Backup device is not compatible. Backup device is damaged. 17. Keyboard can not control device. There are following possibilities: Device serial port setup is not correct Address is not correct...
  • Page 184 There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player. No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS. 23. I forgot local menu operation password or network password Please contact your local service engineer or our sales engineer for help. We can guide you to solve this problem.

  • Page 185: Appendix A Hdd Capacity Calculation

    Appendix A HDD Capacity Calculation Calculate total capacity needed by each device according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for each hour, unit Mbyte.

  • Page 186: Appendix B Compatible Sata Hdd

    10 Appendix B Compatible SATA HDD Manufacturer Series Model Capacity Port Mode Seagate Seagate SV35.1 ST3250824SV 250G SATA Seagate Seagate SV35.1 ST3500641SV 500G SATA Seagate Seagate SV35.2 ST3250820SV 250G SATA Seagate Seagate SV35.2 ST3320620SV 320G SATA Seagate Seagate SV35.2 ST3500630SV 500G SATA Seagate...
  • Page 187 Seagate Seagate Pipeline ST3500414CS 500G SATA Seagate Seagate Pipeline ST3500312CS 500G SATA Seagate Seagate Pipeline ST31000424CS SATA Seagate Seagate Pipeline ST31000322CS SATA Seagate Seagate Pipeline ST1000VM002 SATA Seagate Seagate Pipeline ST1500VM002 Seagate Seagate Pipeline ST2000VM002 SATA Seagate Seagate Pipeline ST2000VM003 SATA Seagate Seagate...
  • Page 188 Constellation ES Seagate Seagate ST500NM0051 500G SATA Constellation ES Seagate Seagate ST33000650NS SATA Constellation ES.2 Seagate Seagate ST32000645NS SATA Constellation ES.2 Seagate Seagate ST33000651NS SATA Constellation ES.2 Seagate Seagate ST32000646NS SATA Constellation ES.2 Seagate Seagate ST33000652NS SATA Constellation ES.2 Seagate Seagate ST32000647NS SATA...
  • Page 189 Digital Westem WD AV—AVJS WD3200AVJS-63WDA0 320G SATA Digital Westem WD AV—AVJS WD5000AVJS-63YJA0 500G SATA Digital Westem WDAV-GP—AVCS WD5000AVCS-63H1B1 500G SATA Digital Westem WDAV-GP—AVCS WD7500AVCS-63ZLB0 750G SATA Digital Westem WDAV-GP—AVCS WD3200AVCS 320G SATA Digital Westem WDAV-GP—AVCS WD2500AVCS 250G SATA Digital Westem WDAV-GP—EVCS WD10EVCS-63ZLB0 SATA...
  • Page 190 Digital Westem WD AV-GP WD20EURS SATA Digital Westem WD AV-GP WD15EURS 1.5T SATA Digital Westem WD AV-GP WD10EURS SATA Digital Westem WD AV-GP WD10EURX SATA Digital Westem WD AV-GP WD7500AURS 750G SATA Digital Westem WD AV-GP WD7500AVDS 500G SATA Digital Westem WD AV-GP WD500AVDS...

  • Page 191: Appendix C Compatible Usb2.0 List

    11 Appendix C Compatible USB2.0 List Manufacturer Model Capacity Sandisk Cruzer Micro 512M Sandisk Cruzer Micro Sandisk Cruzer Micro Sandisk Cruzer Freedom 256M Sandisk Cruzer Freedom 512M Sandisk Cruzer Fredom Sandisk Cruzer Freedom Kingston Data Traveler II Kingston Data Traveler II Kingston Data Traveler Kingston...
  • Page 192 Teclast Ti Cool 512M Teclast Ti Cool Teclast Ti Cool...

  • Page 193: Appendix D Compatible Displayer List

    12 Appendix D Compatible Displayer List Brand Model Dimension (Unit: inch) BENQ（LCD） ET-0007-TA 19-inch (wide screen) DELL（LCD） E178FPc 17-inch BENQ（LCD） Q7T4 17-inch BENQ（LCD） Q7T3 17-inch LENOVO（LCD） LXB-L17C 17-inch SANGSUNG（LCD） 225BW 22-inch (wide screen) LENOVO(CRT) LXB-FD17069HB 17-inch LENOVO(CRT) LXB-HF769A 17-inch LENOVO(CRT) LX-GJ556D 17-inch Samsung (LCD)

  • Page 194: Appendix H Toxic Or Hazardous Materials Or Elements

    Appendix H Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Sheet ○ ○ ○ ○ ○ ○ Metal(Case) Plastic Parts ○ ○ ○ ○ ○ ○ （Panel） Circuit Board ○ ○ ○...

This manual is also suitable for:

Nvr-elt-8Nvr-elt-4-poe4 4ch series

Table of Contents