Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
NAS enable
Server IP
Port
User Name
File length
Password
Remote Path
Channel
Period
info.
Setup
Copy
NTP
The NTP interface is shown as in Figure 7-35.
Figure 7-34 NAS Setup
Function
Please select network storage protocol and then enable
NAS function. The network storage protocol includes
FTP.
Input remote storage server IP address.
Input Remote storage server port number.
Log in user account.
The max files length when you transfer the file. When
the input value is 0, then system upload the whole files.
The password you need to login the server.
Remote storage file path.
Select a monitor channel .
In NAS interface, click set button, you can go to the
corresponding setup interface. See Figure 7-34.
.Please set schedule period and then select
corresponding record type: schedule/alarm. Please
note device does not support motion detect record
function now.
Please select date (Current setup applies to current
day by default. You can draw a circle before the
week to apply the setup to the whole week.)
After complete setup, please go back to Figure 7-28
and then click save to save current time period
setup.
User can use this shortcut to copy the storage state of a
channel to another (or all other channels)
162
Advertisement
Table of Contents
