Security Camera King NVR-ELC-16 User Manual page 123

Parameter
Function
Remote
PPPOE
host
Email
The email interface is shown as in Figure 7-31.
Please refer to the following sheet for detailed information.
Parameter
SMTP Server
SSL enable
Port
User Name
Password
Sender
Input the user name and password which ISP(Internet service supplier)
provided and chose enable.
Reboot system after configuration is saved and the device will auto connect
to Internet. The IP address is the WAN IP.
There are two conditions for reboot,
1. The user must have the authority to reboot device.
2. There is no user login the system menu on the local end
After PPPOE dial succeed, get the current IP address and visit this IP
address via WEB.
Figure 7-31 Email
Function
Input server address and then enable this function.
You can also input the corresponding server domain name
here, but you need to go to DNS interface (chapter 7.3.4.1) to
set the server IP that can parse the domain.
You can enable SSL encryption function to guarantee data
safety.
Default value is 25. You can modify it if necessary.
The sender email account user name.
The sender email account password.
Sender email address.
159