Table of Contents
Advertisement
Parameter
MAC Address
IP Address
Subnet Prefix
Default Gateway
TCP Port
HTTP Port
RTSP port
UDP Port
Max Connection
Please note system needs to check the validity of all IPv6 addresses. The IP address and
the default gateway shall be in the same IP section. That is to say, the specified length of
the subnet prefix shall have the same string.
For the IP address of IPv6 version, default gateway, preferred DNS and alternate DNS, the input
value shall be 128-digit. It shall not be left in blank.
Advanced setup
The remote host can choose multi-cast and PPOE to set. See Figure 7-30.
Function
The host in the LAN can get a unique MAC address. It is for
you to access in the LAN. It is read-only.
Here you can use up/down button (
corresponding number to input IP address. Then you can set
the corresponding subnet mask the default gateway.
The input value ranges from 0 to 128. It is to mark a specifi
network MAC address. Usually it includes an organization
multiple-level.
Here you can input the default gateway.
Default value is 37777. You can change if necessary.
Default value is 80.
Default value is 554.
Default value is 37778. You can change if necessary.
Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Figure 7-30 Network
) or input the
\
158
Advertisement
Table of Contents
