System; Operational Precautions - Sym Mio 50 Service Manual

13. Brake

Operational Precautions

General information
Caution
Inhaling asbestos may cause disorders of respiration system or cancer, therefore, never use air hose
●
or dry brush to clean brake parts. Use vacuum cleaner or other authorized tool instead.
The brake caliper can be removed without removing the hydraulic system.
After the hydraulic system is removed, or the brake system is felt to be too soft, bleed the hydraulic

system.

While refilling brake fluid, care should be taken not to let the foreign material entering into the brake
system.
Do not spill brake fluid on the painted surfaces, plastic or rubber parts to avoid damage.
Check the operation of the brake system before you go.
Specifications
Item
The thickness of front brake disc
Front brake disc eccentricity
Master cylinder inner diameter
ID of front & rear brake drums
OD of front brake disc
Thickness of front disc brake lining
Thickness of front drum brake lining
Thickness of rear brake lining
Torque values:
Bolt for front brake arm
Bolt for rear brake arm
Brake hose bolt
Bolt for brake caliper
Air-bleed valve of front brake
13-4
To this chapter contents
Standard (mm)
3.50
0.10
11.000~11.043
HU10U/W ¡ G 110/110
HU05U¡ G 110/95
160.00
¢ w
¢ w
¢ w
0.8~1.2kgf-m
0.8~1.2kgf-m
3.3~3.7kgf-m
3.1~3.5kgf-m
0.8~1.0kgf-m
Unit: mm
Limit (mm)
2.00
0.30
11.055
HU10U/W ¡ G 110.50
HU05U¡ G 95.50
¢ w
As brake lining mark
2mm or As brake lining mark
2mm or As brake lining mark