Introduction; Ce Conformity - Aqua Lung Calypso Owner's Manual

2. INTRODUCTION

Congratulations – and thank you – for choosing Aqua Lung. Your new regula-
tor meets all existing standards for quality and performance and has been des-
igned and manufactured with the greatest care.
Perhaps, more than any other item of equipment that you have bought, the bet-
ter care you take of your regulator, the better it will perform for you. Its perfor-
mance will be guaranteed by regular servicing at an appointed Aqua Lung
Service Centre. Before diving with your new Aqua Lung regulator it is important
that you read this manual in its entirety so that you can familiarise yourself with
its features and the rules for using the regulator before, during and after the
dive so as to retain optimum performance for the years to come.

2.1 CE Conformity

This regulator has successfully passed all the tests required by the EN
250:2000 standard and has received certification for this type. The maximum
operating depth limit required by the standard for certifying the equipment is
50 metres.
If your regulator carries the >10°C mark, this indicates that the regulator is not
intended for use in water at a temperature below 10°C.
This mark can be found on the 1st stage body for Titan and Kronos series
regulators, or on the 2nd stage for regulators in the Titan LX, Legend series
and Mikron. See photos.
7 B a c k t o t h e c o n t e n t s