About This Document - Honeywell XYR 6000 Quick Start Manual

This document describes mounting, installation and wiring of the XYR 6000 Wireless Transmitters and antennae.
Configuration, authentication and operation are covered in other documents.
Honeywell does not recommend using devices for critical control where there is a single point of failure or where
single points of failure result in unsafe conditions. The initial release of OneWireless (R100) is targeted at open
loop control, supervisory control, and controls that do not have environmental or safety consequences. As with any
process control solution, the end-user must weigh the risks and benefits to determine if the products used are the
right match for the application based on security, safety, and performance. Additionally, it is up to the end-user to
ensure that the control strategy sheds to a safe operating condition if any crucial segment of the control solution
fails.
Revision Information
Document Name
XYR 6000 Transmitters Quick Start Guide
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
Getting Started with Honeywell OneWireless Solutions
OneWireless Wireless Builder User's Guide
OneWireless Builder Parameter Reference
OneWireless XYR 6000 Pressure Transmitter User's Manual
OneWireless XYR 6000 Temperature Transmitter User's Manual
OneWireless XYR 6000 SmartCET Corrosion Transmitter User's Manual
OneWireless XYR 6000 HLAI Transmitter User's Manual
Revision 3
8/8/07

About This Document

Document ID
34-XY-25-21
Document Title
OneWireless XYR 6000 Transmitters Quick Start Guide
Revision Publication
Number Date
1 6/7/07
2 8/7/07
3 8/28/2007
iii