About This Manual - Honeywell ST 800 Series User Manual

This manual provides the details of programming Honeywell ST 800 SmartLine Pressure
Transmitters for applications involving HART versions 5, 6, and 7 and Honeywell's Digitally
Enhanced (DE) communication protocols. For installation, wiring, and maintenance information
refer to the ST 800 SmartLine Pressure Transmitter User Manual, document number 34-ST-25-35.
The configuration of your Transmitter depends on the mode of operation and the options selected
for it with respect to operating controls, displays and mechanical installation. Details for
operations involving the Honeywell Multi-Communication (MC) Tookit (MCT202) are provided
only to the extent necessary to accomplish the tasks-at-hand. Refer to the associated MCT202 User
Manual for complete details. The "Reference" section in the front matter of this manual lists
document titles and numbers.
The ST 800 SmartLine Pressure transmitter can be digitally integrated with one of two systems:
•
Experion PKS: you will need to supplement the information in this document with the data and
procedures in the Experion Knowledge Builder.
•
Honeywell's TotalPlant Solutions (TPS): you will need to supplement the information in this
document with the data in the PM/APM SmartLine Transmitter Integration Manual, which is
supplied with the TDC 3000 book set. (TPS is the evolution of the TDC 3000).
Release Information
ST 800 Series HART/DE Option User Manual, Document # 34-ST-25-38 (this document)
Rev. 1.0, October, 2012 – First Release
Rev. 2.0, January 2013 – Calibration updates
Rev. 3.0, February 2014 – Dual/Triple Cal and PILD added
Rev.4.0, May 2014 – Factory Cal and PILD Upgrade Options
Rev.5.0, July 2014 – PILD License/firmware updates
References
The following list identifies publications that may contain information relevant to the information
in this document.
ST 800 SmartLine Pressure Transmitter Quick Start Installation Guide, # 34-ST-25-36
ST 800 & ST 700 SmartLine Pressure Transmitter w/ HART Comms Safety Manual, 34-ST-25-37
ST 800 SmartLine Pressure Transmitter User Manual, # 34-ST-25-35
ST 800 Transmitter with FOUNDATION Fieldbus Option & Function Blocks Installation &
Device Reference , # 34-ST-25-39
MC Tookit User Manual, Document # 34-ST-25-20
PM/APM SmartLine Transmitter Integration Manual, # PM 12-410
ST 800 Series Pressure, Analog, HART and DE Communications form, Drawing #50049892
Smart Field Communicator Model STS 103 Operating Guide, Document # 34-ST-11-14
Technical Bulletin, Communicating with Honeywell™ ST3000/STT3000 Smart Transmitters, #TB-
960704B
MC Toolkit Modem Code Download Instruction Manual, Document # 34-ST-25-33
Revision 5.0

About This Manual

ST 800 Series HART/DE Option User's Manual Page iii