Table of Contents
Advertisement
8
Alarm Conditions
In case of failure the micro-controller based board stops mist production and water input.
After a wait period of 5 minutes the humidifier automatically start with tank cleaning
phase.
During the stop phase green led (1) is OFF, red led (3) could signal FAN failure; red led (2)
and yellow led (4) identify the failure.
8.1
Water Failure
This failure is signalled with yellow led (2) blinking and green led (1) OFF.
8.2
Draining System Failure
Draining system failure during tank cleaning phase. The causes of this failure can be a
problem with draining solenoid valve or an obstruction in the draining system (pipes).
This failure is signalled with red led (2) blinking and green led (1) OFF.
9
Tank draining
When the humidifier is not used is mandatory to execute a manual draining. To complete
this operation execute following steps:
1.
Close input valve
2.
Switch OFF the unit
3.
Switch ON the unit
4.
Wait until tank is empty
1.
Green LED blink
2.
Yellow LED is ON
5.
Switch OFF the unit
Elsteam S.r.l - via E.fermi, 496 - 21042 Caronno Pertusella (va) - Tel.+39 02 9659890 - Fax +39 02 96457007
E-mail: infocomm@elsteam.com/infotech@elsteam.com - Web: http://www.elsteam.com
p.iva 01463940120 - c.f.05046150156 - trib.di busto a. 16415-c.c.i.a.a. varese 174164 - cap.soc.i.v. euro 10400,00
11
Advertisement
Table of Contents
