Elsteam UH06-OEM User, Installation And Maintenance Manual page 7

Each connection of terminal will have to be firmly protected by a fixing of cable.

Before the beginning of installation (and all operations of
maintenance and maintenance without panel) the power supply
must be disconnected on all the lines and insured against an
involuntary connection! Before making electric connections check
that the tension corresponds to those of the humidifier!
The electric terminals are positioned inside the apparatus (remove the screws which block
the lower panel of the case to reach them).
In case the mains transformer is not delivered already connected to the humidifier, please
use table below to connect.
0V
0V 14V
shows positioning of electrical terminals on the electronic board.
Figure 1
Elsteam S.r.l - via E.fermi, 496 - 21042 Caronno Pertusella (va) - Tel.+39 02 9659890 - Fax +39 02 96457007
E-mail: infocomm@elsteam.com/infotech@elsteam.com - Web: http://www.elsteam.com
p.iva 01463940120 - c.f.05046150156 - trib.di busto a. 16415-c.c.i.a.a. varese 174164 - cap.soc.i.v. euro 10400,00
Mains transformer Connections
220V
0V BLUE cable
12/14V RED cable
48/59V VIOLET cable
0V FASTON
48V
220V FASTON
Figure 1 - Electronic Board
7
Electronic Board
Electronic Board
Electronic Board
Circuit breaker
Circuit breaker