Table of Contents
Advertisement
10 Submerged Pump 220Vac
The unit can operate with a pump feeding the humidifier. In the case of use of a submerged
220Vac pump, power supply of the pump must be carried out according to the following
schematic.
The installation of the pump with the tank must respect the outline of below figure. The
tank can be installed in a position higher than the humidifier. If the tank is installed in a
position lower than the humidifier the difference between solenoid valve and the bottom of
the tank should not exceed 60cm with the standard pump provided by Elsteam.
1
2
3
4
5
Elsteam S.r.l - via E.fermi, 496 - 21042 Caronno Pertusella (va) - Tel.+39 02 9659890 - Fax +39 02 96457007
E-mail: infocomm@elsteam.com/infotech@elsteam.com - Web: http://www.elsteam.com
p.iva 01463940120 - c.f.05046150156 - trib.di busto a. 16415-c.c.i.a.a. varese 174164 - cap.soc.i.v. euro 10400,00
Bornier #1
Bornier #1
13 12 11 10 9 8 7 6 5 4 3 2 1
13 12 11 10 9 8 7 6 5 4 3 2 1
220 Vac ~
220 Vac ~
Humidifier
Solenoid valve (optional)
Flexible pipe
Pump
Tank
Pompe
Pompe
12
Advertisement
Table of Contents
