Mercury 40 Sea Pro User Manual page 72

2. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2-4-C with Teflon or Special Lubricant
101.
• Swivel Bracket - Lubricate through fitting.
• Tilt Tube - Lubricate through fitting.
• Co-Pilot Shaft (Tiller Handle Models) - Lubricate through fitting. Move the steering friction lever back
and forth while lubricating.
a - Tilt Tube
• Lubricate threads of transom clamp screws (if equipped).
• Shift Handle (Tiller Handle Models) - Lubricate through fittings.
• Steering Cable Grease Fitting (If equipped) - Rotate steering wheel to fully retract the steering cable
end into the outboard tilt tube. Lubricate through fitting.
MAINTENANCE
a
b
b -
67
ob00635
a
3089
Co-pilot shaft
ob00637
3091