Mercury 40 Sea Pro User Manual page 52

a - Reverse/tilt position
8. Tiller handle models - Move throttle grip to "START" position.
9. Remote control models - Move on/off switch to the on position.
NOTE: Manual starting models - For initial start of a new engine or first start after a prolonged storage, primer lines
may have air in them. In this case, push in the primer bulb several times until fluid can be felt and then the normal
4 to 6 rapid primes.
10. Manual starting models - If engine is cold, push in the primer bulb rapidly 4 to 6 times.
OPERATION
a
b
a
0%100
START
START
47
ob00625
b
ob00333
b - Lock/run position
3075
3026