Special Keys - Alexor PC9155-433/868 Installation Manual

PC9155 Wireless Alarm System
Entering Letters
Some commands require the entry of letters (i.e., A, B, C, D, E, F).
To enter a letter, press and the number on the keypad that corresponds to the appropriate letter, as indicated below.
,
1 = A
2 = B
3 = C
The cursor will blink to indicate that you are entering letters. To revert back to numeric entry press
Incorrect Data Entries:
To change a data entry before it has been accepted by the alarm system, use the scroll keys to reposition the cursor then re-enter the digit. If the
data has already been accepted by the system, press [#] to exit the section then re-enter the programming section and enter the data again.
If you incorrectly enter 0001 in Step 2 of Program alarm system in Template Programming, you must either reset the alarm system to its default
values (section. [996], re-enroll all wireless devices and re-program the system) or re-enter the correct data in Installer Programming [ ][8].

Special Keys:

Scroll symbols on the display indicate that there are options you can view by pressing the
< >
used to position the cursor.
The , key is similar in function to the 'ENTER' key on a personal computer. It is generally used to accept the existing programming option.
It is also the first key entry for [ ] commands and can be used to enter the letters A-F when in Installer Programming mode.
The key functions similarly to the 'ESCAPE' key on a personal computer. It is generally used to exit the current programming section or to
return to the previous menu.
4 = D
5 = E
6 = F
1-3
,
.
keys. These scroll keys can also be