RESET FUNCTION
This function is used to reset Smoke Detectors, Zone Troubles, and Zone Tampers.
Your system must be Disarmed to use the Reset function.
Press [7]-[7]. Resets have now been performed.
1.
If the keypad begins beeping, the reset did not execute properly. Enter your
2.
code to silence the keypad. Wait a few minutes and repeat step 2 to attempt
another reset. If the keypad still beeps after repeated attempts, please contact
your installer.
SET SYSTEM DATE
Press the [7]-[9]-[6]-["Master Code"].
1.
Enter the "Day of Week "
2.
1=Sunday
2=Monday
Enter the "Month Code". Must always be two (2) digits.
3.
01 = January
05 = May
09 = September
Enter the "Day Code". Must always be two (2) digits.
4.
Example: The 5
Enter the last two digits of the "Year Code".
5.
Example: For 2007 enter [0]–[7].
SETTING THE SYSTEM CLOCK
Press [7]-[9]-[7]-["Master Code"].
1.
Enter the "hour code" which must be two (2) digits. NOTE: The clock is a 24-
2.
hour clock. Refer to the following table.
Enter the "minutes code" which must be two (2) digits.
3.
Example: 7 minutes after would be entered [0]–[7].
3=Tuesday
4=Wednesday
02 = February
06 = June
10 = October
th
would be entered as [0]–[5].
5=Thursday
6=Friday
03 = March
07 = July
11 = November
7=Saturday
04 = April
08 = August
12 = December
LED Keypad