Hardware Installation
Onboard LAN LED Definition
When this LED is lit, this
means the LAN is running
at 100 mbps, if it is not lit,
the Onboard LAN is
working at 10 mbps.
Step 5 Power On
You have now completed the hardware installation of your Motherboard
successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the system is
performing the diagnostic checks,
Note: If you have failed to enter the BIOS Setup utility, wait until
the boot up sequence is completed. Then push the RESET button
and press <DEL> key again at the beginning of boot-up, during
diagnostic checks.
SY-P4I875P DRAGON 2
48
This is the LAN activity
LED. It will blink when
it is active.