SOYO SY-P4I875P DRAGON 2 User Manual page 116

Silicon Image Serial ATA Driver Installation
Installing Silicon Image SI3112A during OS
Installation
Install driver during Windows XP installation
1. Go to "d:\raid\siliconimage driver\" directory, (assuming that
your CD-ROM is drive d) copy all the files and directory to a
floppy disk.
2. Windows XP will start to inspect your hardware configuration
3. Press "F6" when the message "Press F6 if you need to install a
third party SCSI or RAID driver...." Appear. below
4. Press S key to specify additional devices when the Windows XP
Setup window appears.
5. Insert the floppy disk of driver, then press Enter to continue
6. In the follow-on window of device type, please select " Silicon
Image Sil 3x12 SATARaid controller for windows XP " to
continue
7. Win XP will prompt you that a message that the driver is newer
than the default driver, press S (use the driver on floppy) to
continue
8. The follow-on interface will list the devices to be installed, in
which " Silicon Image Sil 3x12 SATARaid controller for
windows XP" item should be included. (If users want to install
other devices, press "S" at this time.) Press ENTER to continue
Windows XP setup
SY-P4I875P DRAGON 2
116