Highpoint HPT372 Driver Installation
For more information on the HighPoint Utility Software, please check the
HPT372 manual located in "d:\doc" folder in the Soyo driver CD.
Installing Driver on an Existing System
If Windows can not find new hardware, the driver can be installed through the
following steps:
Windows XP
1.
Right click on [My Computer] , select [Properties] . This will start
up the System Properties.
2.
Select [Hardware] [Device Manager]
3.
You will see 2 "! RAID Controller" entries under unknown device,
one of them is the Highpoint RAID controller and the other is the
Silicon Image RAID controller.
4.
Right click "! RAID controller" and then update driver
SY-P4I875P DRAGON 2
106