Creating And Deleting Raid Sets; Creating Raid Sets - SOYO SY-P4I875P DRAGON 2 User Manual

CREATING and DELETING RAID SETS

Creating and deleting RAID sets is a function found in the BIOS. During
bootup, the following message will appear, pausing for a few moments to
allow the user to choose what to do:
Press <CRTL-S> or F4 to enter RAID utility
An easy-to-use screen will appear with the following choices in the top left:
Create RAID Set
Delete RAID Set
Rebuild RAID Set
Resolve Conflicts
Below this will be listed the drives currently installed on the system.

Creating RAID Sets

Because SATARaid supports two drives, creating RAID Sets is a simple
procedure.
1. Select "Create RAID Set."
2. Choose either a "Striped" or "Mirrored" RAID Set.
3. Select if you want the utility to Auto Configure the RAID Set or if you
want to manually configure the RAID Set. For Striped Sets, you can
change the chunk size. For Mirrored Sets, you assign which is the
Source and Target drives, as well as if you want Disk Copy.
4. The utility will ask, "Are You Sure?" before completing the
configuration.
126