De-Installing Q-Vet - Compaq AlphaServer GS160 Installation Manual

4.4.4

De-Installing Q-VET

The procedures for de-installation of Q-VET differ between operating
systems. You must de-install Q-VET from each partition in the system.
You must de-install Q-VET from each partition. Failure to do so may result in
the loss of customer data at a later date if Q-VET is misused.
Follow the instructions listed under your operating system to de-install Q-VET
from a partition. The qvet_uninstall programs will remove the Q-VET
supplied tools and restore the original system tuning/configuration settings.
Tru64 UNIX
1. Stop, Terminate, and Exit from Q-VET testing.
2. Delete ( rm ) any Q-VET kit file (QVET_Vxxx.tar).
3. Note: log files are retained in /usr/field/tool_logs
4. Execute the program qvet_uninstall
5. Reboot the system. You MUST reboot in any case, even if Q-VET is to be
reinstalled.
OpenVMS
1. Stop, Terminate, and Exit from any Q-VET testing.
2. Delete QVETAXP0xx.A and QVETAXPxxx.EXE if they are still on the
system.
3. Execute the program @sys$manager:qvet_uninstall.com
4. Note: log files are retained in sys$specific:[sysmgr.tool_logs]
5. Reboot the system. You MUST reboot in any case, even if Q-VET is to be
reinstalled.
4-22 AlphaServer GS160/320 Installation Guide