Raising The Power Convertible Top - Chrysler Sebring Convertible 2010 User Manual

92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Raising the Power Convertible Top

Using the Power Top Switch
NOTE: The power top switch will operate when the
ignition switch is turned to the ON or ACC position and
when in the power accessory delay.
Press and hold the switch in the Top Up
position until the operation of raising the top
and latching it is complete, which is indicated
by the system raising the windows and dis-
playing "TOP DONE" in the odometer or "CONVERT-
IBLE TOP COMPLETE" in the EVIC (if equipped).
Using the Remote Keyless Entry Transmitter
You cannot use the power top button on the RKE
transmitter to raise the power convertible top. You must
use the power top switch inside the vehicle to perform
this operation.
Manually
Closing the power convertible top manually is a compli-
cated and physically demanding procedure, and it re-
quires a special tool to do so. In the event that you
experience a malfunction when operating the power
convertible top:
1. Read all of the Notes, Cautions, and Warning found
under "Power Convertible Top Usage Precautions" to
verify all operating conditions are met.
2. Check for Operation and Warning Messages as de-
scribed under "Power Convertible Top Operation and
Warning Messages." If applicable, perform the related
action to correct the condition present.
3. If Steps 1 and 2 do not resolve the problem, refer to
"Emergency Bypass Mode" in this Section.