Installation; Ac Power; Backup Battery Pack; Telephone Line Connections - Paradox Magellan MG-6060 Reference And Installation Manual

All-in-one wireless security system v1.0
Hide thumbs Also See for Magellan MG-6060:
Table of Contents

Advertisement

AC Power

Magellan requires a 9Vac (1A/9VA) or 16.5Vac (20VA)
transformer (not included) to supply power to the console.
Connect the transformer to the
on page 6.
Magellan can also be powered through a DC power supply.
Connect a 12Vdc to 18Vdc to the
console.
Do not use any switch-controlled outlets to power the
transformer.
Figure 1: Connecting the Transformer
Insert the transformer's wires into the

Backup Battery Pack

Magellan uses a backup battery pack to provide power during a
power loss. A 7.2Vdc 1.8 to 2.0Ah NiMH (Nickel Metal Hydride)
rechargeable battery pack is included with the Magellan console.
Connect the battery pack as shown in Figure 2 on page 6.
Connect the backup battery pack after applying AC power.
Figure 2: Connecting the Backup Battery
Partial view of the backside of the Magellan console
1.
Insert the backup battery's
plug into the connector
labeled
.
BATT
6

Installation

terminals as shown in Figure 1
AC
terminals to power the
AC
Back view of the Magellan
console.
Do not use any
switch- controlled
outlets.
9Vac (1A/9VA) to
16Vac (20VA)
transformer
terminals.
AC
Figure 2: Connecting the Backup Battery (cont'd)
2.
Slide in the battery pack horizontally, tilt the battery pack
downward and then tuck it in Magellan's battery compartment.
3.
Tuck the cables in the specially
designed slot.
4.
Snap in the battery
compartment cover when finished.

Telephone Line Connections

The Magellan console can be connected to a telephone line by
connecting the telephone company's wires directly to Magellan's
dialer or by connecting a standard 4-pin RJ-11 cable between
the
plug of the console to a standard telephone wall jack.
LINE
Direct Connect
Connect the telephone line through an RJ31X jack as shown in
Figure 3 on page 6.
Figure 3: Telephone Line Direct Connect
To connect the telephone line:
1. Connect an RJ31X to the
-
R
1,
-1,
and
T
RING
TIP
terminals as shown at right.
2. Connect the telephone
company wires and the
home telephone to the
RJ31X.
Partial view of the backside
of the Magellan console
Back view of the Magellan
console.
Reference & Installation Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents