Emergency Emptying Out - John Lewis JLWD 1609 Instruction Manual

Emergency emptying out

If the water is not discharged, proceed as follows to
empty out the machine:
●
Pull out the plug from the power socket;
●
Close the water tap;
●
If necessary, wait until the water has cooled down;
●
Open the pump door using a suitable tool;
●
Place a bowl with a small edge close to the pump to
collect any spillage. Remove the emergency
emptying cap from the filter cover. The water
should drain by gravity into the bowl. When the
bowl is full, put the cap back on filter cover. Empty
the bowl. Repeat the procedure until water stops
flowing out;
● Clean the pump if necessary as previously described;
●
Replace the filter into the pump and screw it firmly
as previously described;
●
Replace the emergency emptying cap into the filter
cover and close the pump door.
28