Pen Calibration; Calibrating Automatically - Epson EB-1430Wi User Manual

Preparing Before Using Interactive Features
a • If you do not want to use the hovering feature, you can turn it off
using the Easy Interactive Function setting in the projector's
Extended menu.
s Extended - Easy Interactive Function - Hovering
• To make a long press of the pen act as a right-click, select the
following settings in the Easy Interactive Function setting in the
projector's Extended menu.
- Set the Pen Operation Mode setting to Two Users/Mouse or One
User/Mouse (EB-1420Wi).
- Set the Pen Operation Mode setting to Mode 1 or Mode 3
(EB-1430Wi).
- Set the Enable Right Click setting to On.

Pen Calibration

Calibration coordinates the positioning of the pen with the location of your
cursor. You only need to calibrate the first time you use your projector.
You can use Auto Calibration to calibrate the system, but Manual
Calibration is also available for finer adjustments or if Auto Calibration
failed.
a • Move any pen you are not using away from the projection screen
while calibrating the system.
• Calibrate the system again if you notice any discrepancy in
positioning after doing any of the following:
- Performing Keystone correction
- Adjusting the image size
- Using the Image Shift feature
- Changing the projector position
• The calibration results remain until you recalibrate.

Calibrating Automatically

You need to calibrate the first time you use your projector, and you do not
need the pens or a computer for Auto Calibration.
p.181
a
You can also start Auto Calibration by pressing the Menu button or
User button on the remote control.
a
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
b
Select the Easy Interactive Function setting and press the [Enter]
button.
76