Epson EB-1430Wi User Manual page 180

List of Functions
Sub-menu
Display You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
when no image signal is available to Black, Blue, or
Logo.
Startup Screen
when projection starts.
A/V Mute
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
Toolbar: Set whether or not the toolbar tab is always
displayed when using Annotation Mode.
Pen Mode Icon: Set the display position for the pen mode
icon when using the interactive features. The icon is hidden
when set to Off.
Projector Control: Set the display position for the projector
control tools when using the interactive features. The default
value is Bottom. When set to Off, the projector control
tools are hidden.
*1 You can change the user's logo that is displayed as a
User's Logo
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo"
Function
*1 : You can set the screen status for
*1 : Set to On to display the User's Logo
*1 : You can set the screen displayed when the
p.145
Sub-menu
Projection Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Upside Down, Rear, and Rear/Upside Down
You can change the Projection setting as follows by holding
down the [A/V Mute] button on the remote control for
about five seconds.
FrontWFront/Upside Down
RearWRear/Upside Down
s "Installation Methods"
Direct Power On: Set to On to turn on the projector
Operation
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m or higher.
Startup Source Search: Set to Off to project images from
the same source as the last time the projector was used.
Auto Power On: (Only available when Standby Mode is set
to Communication On.) If this is set to Computer, the
projector turns on when signals are received from the
Computer port, even when the projector is in standby
mode. The default value is Off.
180
Function
p.30