Cleaning; Cleaning The Projector's Surface; Cleaning The Projection Window; Cleaning The Obstacle Sensor - Epson EB-1430Wi User Manual

Cleaning

You should clean the projector if it becomes dirty or if the quality of
projected images starts to deteriorate.
Caution
Before cleaning, turn off the projector's power and unplug the power cable.
Otherwise, it could cause an electric shock.

Cleaning the Projector's Surface

Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.

Cleaning the Projection Window

Use a commercially available cloth for cleaning glasses to gently wipe the
projection window.
Warning
Do not use sprays that contain flammable gas to remove dirt and dust from the
lens. The projector may catch fire because of the high temperature of the lamp
inside the projector.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.

Cleaning the Obstacle Sensor

Clean the obstacle sensor when the message "For safety purposes remove
any obstacles blocking the lens." is displayed along with a warning sound.
Use a commercially available cloth for cleaning glasses to gently wipe the
obstacle sensor.
Warning
Do not use sprays that contain flammable gas to remove dirt and dust from the
obstacle sensor. The projector may catch fire because of the high temperature
of the lamp inside the projector.
230