Share Drawing Contents With Other Devices - Epson EB-1430Wi User Manual

Draw on a Whiteboard Screen (Whiteboard Mode)
B
Select the email address for the sender from the registered address book. You
can set the address book using a Web browser.
s "Creating an Address Book"
C
Add the destination address. You can specify up to 10 addresses.
D
Enter the subject for the email.
E
Enter the file name for the attachment.
F
Select the format for the attached file (PDF, PNG, or EWF). For PDFs and
EWFs, you can encrypt the file. Enter a password when you want to encrypt
the file.
Attention
• When you enter the password, it is displayed on the screen.
• When encrypting a file, make sure you do not forget the
password.
G
Set the page that you want to send.
c
Click Send.
a
• If there is a lot of content on the projected screen, it may
take a while to send the email.
• You may not be able to send the email depending on the
destination mail server settings. Contact your network
administrator about the mail server settings in advance.

Share Drawing Contents with Other Devices

You can share the whiteboard screen with other devices that are connected
to the same network. This allows you to view and draw on the whiteboard
screen at the same time from other projectors or tablet devices.
p.157
When sharing a whiteboard, you need to connect the projector to the
network.
To connect to the network using a cable, connect a LAN cable to the
projector.
"Connecting a LAN Cable" p.44
s
To connect to the network wirelessly, install the supplied wireless LAN unit
on the projector, and then configure the Wireless LAN settings from the
Network menu.
"Installing the Wireless LAN Unit"
s
"Wireless LAN Menu" p.190
s
96
p.45