Projecting Images; From Installation To Projection - Epson EB-1430Wi User Manual

Projecting Images

From Installation to Projection

This section explains the procedure for connecting the projector to a
computer via a computer cable and projecting images.
Caution
Be sure to connect the cable of the source to the projector first, and then
connect the power cord to the projector.
ON
a
Connect the projector to the computer with the computer cable.
b
Connect the projector to an electrical outlet with the power cord.
c
Turn on the projector.
Warning
When turning on the projector, do not look into the projection lens.
This could cause damage to eyesight due to the powerful light emitted.
When turning on the projector at a distance using the remote control,
make sure there is no one looking into the lens.
Take particular care when there are children present.
d
Turn on the computer.
e
Change the computer's screen output.
When using a laptop computer, you need to change the screen
output from the computer.
Hold down the Fn key (function key), and press the b key.
a
• The method for changing differs depending on the computer
being used. See the documentation supplied with the
computer.
• Press the [t] button twice to turn the projector off.
If no image is projected, press the [Source Search] button on the remote
control, control panel, or the Control Pad. When there is no image signal
input, Whiteboard Mode is displayed.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.54
53