Jeep Wrangler 2007 (Modifications To Radio Cavity Required) - Metra Electronics 99-6511 Installation Instructions Manual

Disconnect the negative battery ter-
1
minal to prevent an accidental short
circuit.
2 Unclip and remove the lower center
trim below a/c controls. (Figure A)
3 Remove (2) Phillips screws exposed
behind lower center panel. (Figure A)
4 Unclip and remove the upper center
trim starting towards the rear of the
panel. (Figure A)
5 Remove (2) Phillips screws exposed
behind upper center panel. (Figure A)
6 Unclip and remove entire panel sur-
rounding radio and climate controls,
including a/c vents.
Remove (4) 7MM screws securing
7
radio. Unplug and remove radio.
(Figure B)
Continue to kit assembly.
99-6511 DASH DISASSEMBL Y
JEEP WRANGLER 2007
A
B
7
1 6
2 3 4 5
1 2 4 5 6
3