Fitting The Chimney Stack - John Lewis JLBIHD601 Instruction Manual

Fitting the Upper Chimney
• Slightly widen the two sides of the upper chimney and
hook them behind the brackets item 7.2.1 ensuring they
are correctly seated.
• Secure the sides to the brackets using the 4 screws item
12c (2.9 x 9.5mm) supplied.
Fitting the Lower Chimney
• Slightly widen the two sides of the lower chimney and
hook them between the upper chimney and the wall,
ensuring they are correctly seated.
• Fix the lower chimney to the hood body using 2 screws
item 12c (2.9 x 9.5mm) supplied.
• Make sure that the air outlet connection is aligned with
the chimney outlets.
8