Contents Contents Introduction Safety is important In the box Safety information Important safety information Warnings Cautions Electrical information Mains supply Operation Controls Care, Cleaning and Servicing Care and Cleaning Cleaning and Replacing Filters Aluminium Filters Charcoal Filters (Not Supplied) Replacing Lights Servicing Installation Preparation for installation...
Introduction Thank you for purchasing this JLBIHD620 chimney hood. Please take time to read these instructions and retain for future reference. Safety is important To ensure your safety and the safety of others, please read the Safety information before you operate this product.
To avoid accidents to property or people it is important to carefully before use follow the instructions given. Failure to do so removes any liability from John Lewis. Take note of the following safety information: Warnings Warning! To prevent fi re or shock hazard, do not expose this cooker hood to rain or •...
Electrical information Cautions • This cooker hood is designed for domestic use only. Mains supply • This cooker hood is designed to be operated by adults. Children should not be allowed to tamper with the controls Should the power supply cable need to be replaced, this or play with the cooker hood.
Operation Controls The controls are (Left to right): Motor working indicator. Off. Switch the cooker hood off. Fan speed 1. Fan speed 2. Fan speed 3. Light. Press this button to operate the LED lights in the cooker hood. Note: For regular cooking, we recommend using fan setting 1 or 2.
Care, Cleaning and Servicing Charcoal Filters (Not supplied) Note: Switch off and unplug the cooker hood before carrying out any cleaning or maintenance work. Charcoal fi lters are designed to absorb grease, dust and unwanted odours during cooking. Care and Cleaning Non-regenerable charcoal fi...
Replacing Lights Your cooker hood is fi tted with LEDs. They should only be replaced by an authorised service engineer. Servicing This cooker hood should only be serviced by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the cooker hood yourself.
Installation Preparation for installation 3 Adjust the width of the support bracket for the upper fl ue and insert screws to attach it to the wall. The cooker hood must be mounted so that the minimum distance between the fi lters and the gas or electric hob is 65cm.
Page 11
5 Insert the upper fl ue into the lower fl ue. 7 Insert the fi lters, as described on page 8. 6 Insert screws (B) to attach upper fl ue to lower fl ue. 8 Connect your cooker hood to the electrical supply. If your fl...
John Lewis branch where you purchased the product. Guarantee Your John Lewis JLBIHD620 chimney hood is covered by a three year parts and labour guarantee. This means that if the chimney hood develops a fault during the guarantee period we arrange a repair free of charge.
Replace the fuse. If you are unsure how to replace a fuse consult a qualifi ed electrician. If none of the above suggestions resolve the problem please contact your local John Lewis branch. Never attempt to repair the cooker hood yourself.
When you contact your local service engineer you will need to persons may cause injury or serious malfunctioning. give the following details: Contact your local John Lewis branch. • Your name, address and post code • Your telephone number • Clear and concise details of fault •...
Specifi cations Specifi cations of the cooker hood that you have just purchased may vary from the information in this table due to technical innovations. Type Chimney Hood Dimensions 600 mm wide x 495 mm high Drive Mode Extraction Rate (per hour) 600 m3 Number of Speeds Noise Level...