Pattern End; Securing - Bernina virtuosa 153 QE Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
Row #5 - Pattern End
• Select stitch #19 on the 153QE and #37 on the 163.
• Engage Pattern End.
• Using Open Embroidery Foot #20, sew until the machine stops.
• Move the fabric forward about 1".
• Program 3 of the same stitches into the memory.
• With the Pattern End function still engaged, sew until the machine stops.
Row #6 - Securing
• Select Stitch #28 on the 153QE and #29 on the 163.
• Select Pattern End and the Securing function.
• Sew until the machine stops. The Securing function takes 3 stitches at the beginning and end of the design.
• Raise the presser foot and push the fabric back about 1".
• Put 3 of the same stitches into the MEM and engage the Securing function.
• Sew until the machine stops. It secured at the beginning of the first pattern and at the end of the third.
Row #7 - Mirror Image
• Use Reverse Pattern Foot #1.
• Select stitch #25 on the 153QE and #23 on the 163.
• Sew one row across the fabri.
• Engage Mirror Image and sew a second row next to the first.
Row #8 - Balance
• Select stitch #8 - sew about one third the distance using the programmed settings; stop.
• Adjust the "balance" to the opened symbol.
• Sew the next third.
• Adjust the balance symbol to the closed symbol.
• Sew the last third.
• Return the "balance" knob to normal.
Note: Clr does not undo Needle Down, Altered settings for
buttonholes, Motor Speed, or Continuous Reverse
BERNINA
M Y
ASTERING OUR
BERNINA
1/04/02
®
®
virtuosa 153 QE/163
virtuosa 153 QE/163/98