Table of Contents
Advertisement
Changing a halogen lamp
^ Before any cleaning or maintenance
work, disconnect the rangehood from
the mains supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket
and the plug is withdrawn, or
– the mains fuse is disconnected, or
– the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
Cleaning and care
^ First remove the grease filters from
the rangehood.
^ Now turn the thumb screw
anti-clockwise. This releases the
halogen lamp partially from its
housing.
^ Turn the halogen lamp anti-clockwise
and pull it downwards to remove.
Replace with a halogen lamp of the
same specification:
GU/GZ 10, 230 V, 50 W.
^ Fit the new halogen lamp by
reversing the above procedure.
Please follow the manufacturer's
instructions.
^ Replace the grease filters.
19
Hide quick links:
Advertisement
Table of Contents
