A range of Miele branded cleaning and
conditioning products is available to
order from Miele (see back page for
details) or the via the internet at
Before any cleaning or
maintenance work is carried out,
disconnect the rangehood from the
– it is switched off at the isolator, or
– it is switched off at the wall
socket and the plug is
– the mains fuse is disconnected,
– the screw-out fuse is removed
(in countries where this is
Exercise caution when changing
halogen lamps. They get very hot
during use, and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease particles
from your fingers will adhere to the
surface and damage it.
The halogen lamps can also be
damaged if water is used to clean
Wait several minutes after switching
off before beginning cleaning.
Cleaning and care
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using the Original Miele
all purpose microfibre cloth or with
warm water and a little washing-up
liquid applied with a well wrung-out
soft sponge or cloth.
Only use a damp cloth as water
could get into the appliance and
^ Wipe dry using a soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
These will damage the surface