Panel Dimmer Control; High Beams; Flash To Pass; Daytime Running Lamps (Drl) - Lincoln 2008 Navigator Owner's Manual

Ford 2008 navigator
Hide thumbs Also See for 2008 Navigator:
Table of Contents

Advertisement

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.
Daytime running lamps (DRL) (if equipped)
Turns the foglamps on at full intensity output. To activate:
• the ignition must be in the ON position and
• the headlamp control must be in the OFF, parking lamps or autolamp
position.
Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Lamp (DRL) system
does not activate the tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel when exterior
lights are on.
• Rotate the thumbwheel from left
to right to brighten the instrument panel.
• Rotate the thumbwheel from right to left to dim the instrument panel.
2008 Navigator (nav)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
73

Advertisement

Table of Contents
loading

Table of Contents