Lincoln Town Car 2000 Owner's Manual
  1. Manuals
  2. Brands
  3. Lincoln Manuals
  4. Automobile
  5. Town Car 2000
  6. Owner's manual

Lincoln Town Car 2000 Owner's Manual

Lincoln town car 2000
Hide thumbs
Table of Contents

Advertisement

Quick Links

www.carburetor-manual.com
Would you like some Free Manuals?
http://carburetor-manual.com/free-shop-manual-club-t-13.html
Also visit
http://freeshopmanual.com
for more Free Manuals
Also Visit my website for 7 FREE Download Manuals starting
with this one.
"The ABC's of Carburetion"
Click Here Now
file:///C|/Documents%20and%20Settings/Tim/Desktop/carburetor-manual-welcome/index.htm[4/25/2009 11:42:20 AM]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Town Car 2000 and is the answer not in the manual?

Questions and answers

Ted
April 3, 2025

I want to play music cd but my in dash won.t play standard mp3 format cds...what Format will my in dash cd player play??

0
1 comments:
Mr. Anderson
April 3, 2025

The in-dash CD player in a 2000 Lincoln Town Car will play audio CDs.

This answer is automatically generated

0

Related Manuals for Lincoln Town Car 2000

Summary of Contents for Lincoln Town Car 2000

  • Page 1 www.carburetor-manual.com Would you like some Free Manuals? http://carburetor-manual.com/free-shop-manual-club-t-13.html Also visit http://freeshopmanual.com for more Free Manuals Also Visit my website for 7 FREE Download Manuals starting with this one. "The ABC's of Carburetion" Click Here Now file:///C|/Documents%20and%20Settings/Tim/Desktop/carburetor-manual-welcome/index.htm[4/25/2009 11:42:20 AM]...

  • Page 2: Table Of Contents

    Contents Before driving Introduction Instrumentation Controls and features Seating and safety restraints Starting and driving Starting Driving Roadside emergencies Servicing Maintenance and care Capacities and specifications Customer assistance Reporting safety defects Index All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company.

  • Page 3: Introduction

    Introduction The following warning may be required by California law: CALIFORNIA Proposition 65 Warning Engine exhaust, some if its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm. ICONS Indicates a safety alert.
  • Page 4 Introduction WARNINGS Warnings provide information which may reduce the risk of personal injury and prevent possible damage to others, your vehicle and its equipment. BREAKING-IN YOUR VEHICLE There are no particular breaking-in rules for your vehicle. During the first 1 600 km (1 000 miles) of driving, vary speeds frequently. This is necessary to give the moving parts a chance to break in.
  • Page 5 Introduction These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Child Seat Installation Child Seat Tether Warning Anchorage Brake System Anti-Lock Brake System Brake Fluid - Traction Control...
  • Page 6 Introduction Vehicle Symbol Glossary Interior Luggage Child Safety Door Compartment Release Lock/Unlock Symbol Panic Alarm Engine Oil Engine Coolant Engine Coolant Temperature Do Not Open When Hot Battery Avoid Smoking, Flames, Battery Acid or Sparks Explosive Gas Fan Warning Maintain Correct Fluid Power Steering Fluid Level Emission System...

  • Page 7: Instrumentation

    Instrumentation Panel dimmer switch (pg. 23) Instrument cluster (pg. 8) Headlamp control Gearshift lever (pg. 23) (pg. 123) CHECK TRAC PUSH ON < FILL ON LEFT km/h SERVICE ENGINE SOON PANEL MIST RESUME NEXT SET ACCEL MODE COAST TEMP Speed control Climate controls (pg.
  • Page 8 Instrumentation Electronic sound system Clock* (pg. 30) (pg. 53) Passenger side air bag (pg. 99) BASS TREB FADE TAPE SEEK TUNE SCAN AUTO SIDE 1 2 COMP SHUFF RESET SELECT FRONT REAR AUTO Traction control switch* Climate control system (pg. 121) (pg.
  • Page 9 Instrumentation WARNING LIGHTS AND CHIMES CHECK TRAC TRUNK AJAR DOOR AJAR WASHER CIRCLE FUEL ECON LTR/100km TRAC OFF AIR SUSPENSION SLOWLY DIST TO EMPTY AVG SPEED TRIP A B O/D OFF TRAC ACTIVE km MILES/GAL SPEED CONTROL COMPASS < FILL ON LEFT km/h SERVICE...
  • Page 10 Instrumentation 2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with good quality fuel and/or properly installing and securely tightening the gas cap.
  • Page 11 Instrumentation Brake system warning Momentarily illuminates when the ignition is turned to the START BRAKE position. Also illuminates if the parking brake is engaged. If the brake warning lamp does not illuminate at these times, seek service immediately. Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately.
  • Page 12 Instrumentation Charging system Illuminates when the ignition is turned to the ON position and the engine is off. The light also illuminates when the battery is not charging properly, requiring electrical system service. Engine oil pressure Momentarily illuminates when the ignition is turned to the ON position and the engine is off.
  • Page 13 Instrumentation Trunk ajar If the trunk is not completely TRUNK AJAR DOOR AJAR closed, this light comes on when CIRCLE you turn the ignition to ON. With TRAC OFF AIR SUSPENSION SLOWLY the ignition ON, this light will flash five times and sound a tone for one second, then remain on.
  • Page 14 Instrumentation O/D off Illuminates when the Transmission TRUNK AJAR DOOR AJAR Control Switch (TCS), refer to CIRCLE Overdrive control in the Controls TRAC OFF AIR SUSPENSION SLOWLY and Features chapter, has been pushed turning the transmission overdrive function OFF. When the O/D OFF TRAC ACTIVE light is on, the transmission does...
  • Page 15 Instrumentation Washer Illuminates when the windshield WASHER FUEL ECON washer fluid is low. LTR/100km DIST TO EMPTY AVG SPEED TRIP A B km MILES/GAL Safety belt warning chime Sounds to remind you to fasten your safety belts. For information on the safety belt warning chime, refer to the Seating and safety restraints chapter.

  • Page 16: Fuel Gauge

    Instrumentation GAUGES CHECK TRAC TRUNK AJAR DOOR AJAR WASHER CIRCLE FUEL ECON LTR/100km TRAC OFF AIR SUSPENSION SLOWLY DIST TO EMPTY AVG SPEED TRIP A B O/D OFF TRAC ACTIVE km MILES/GAL SPEED CONTROL COMPASS < FILL ON LEFT km/h SERVICE ENGINE R N D 2 1...
  • Page 17 Instrumentation Speedometer Indicates the current vehicle speed. km/h Engine coolant temperature gauge Indicates the temperature of the engine coolant. At normal operating temperature, the needle remains within the normal area (the area between the “H” and “C”). If it enters the red section, the engine is overheating.
  • Page 18 Instrumentation The message center allows you to: • see problems such as door ajar TRUNK AJAR DOOR AJAR and trunk ajar. CIRCLE • see the compass direction. TRAC OFF AIR SUSPENSION SLOWLY • check the on/off status of air suspension and speed control O/D OFF TRAC ACTIVE systems.
  • Page 19 Instrumentation Reset Press this control to reset the SELECT RESET selected message center function to zero. (The only functions which can be reset are FUEL ECON and TRIP A or B.) Compass display (if equipped) The compass reading may be TRUNK AJAR DOOR AJAR affected when you drive near large...
  • Page 20 Instrumentation Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 2. Locate the compass module and the calibration button mounted on the center rear view mirror post. 3. Turn ignition to the ON position. 4.
  • Page 21 Instrumentation until the CIRCLE SLOWLY indicator turns off. This will take up to five circles to complete calibration. 6. The compass is now calibrated. Message center functions FUEL ECON (Average fuel economy) Select this function to display your FUEL ECON average fuel economy in liters/ DIST TO EMPTY 100 km or miles/gallon.
  • Page 22 Instrumentation 2. Select FUEL ECON FUEL ECON DIST TO EMPTY AVG SPEED TRIP A B 3. Press the RESET control to clear SELECT RESET the system memory. • Actual highway fuel economy is now displayed. This current average measure will change as the speed control system changes the engine speed to maintain a constant vehicle speed.
  • Page 23 Instrumentation If “CO” or “CS” is displayed, there is a problem with the fuel indication system and you should contact your dealer for service as soon as possible. AVG SPEED To use this function, select AVG FUEL ECON SPEED and press the RESET DIST TO EMPTY control.

  • Page 24: Controls And Features

    Controls and features PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel during headlight PANEL and parklamp operation. • Push up to brighten. • Push down to dim. AUTOLAMP CONTROL The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control.
  • Page 25 Controls and features • the headlamp system is not turned on by another feature such as using the headlamp control or Autolamp. The Daytime Running Light (DRL) system will automatically illuminate the tail lamps and parking lamps at dusk (when the headlamp control is in the OFF position).
  • Page 26 Controls and features Turning the EATC on Press AUTO, any of the override ˚ FRONT controls or the fan speed control. The EATC will only operate when REAR AUTO the vehicle is running. AUTO Turning the EATC off Press OFF. The Outside Temperature (EXT) function will continue to operate until the ignition is turned off.
  • Page 27 Controls and features Temperature selection The display window indicates the ˚ selected temperature, function (AUTO or one of the override controls) and manual control of fan AUTO speed ( ) if automatic fan speed is not desired. To control the temperature, select any temperature between 18°C FRONT (65°F) and 29°C (85°F) by pressing...
  • Page 28 Controls and features Fan speed ( When AUTO is pressed, fan speed is adjusted automatically for existing conditions. You can override fan speed at any time. To control fan speed manually, press the fan control to cancel automatic fan speed operation or use the steering AUTO wheel fan speed control.
  • Page 29 Controls and features Under normal conditions, your vehicle’s climate control system should be left in any position other than MAX A/C or OFF when the vehicle is parked. This allows the vehicle to “breathe” through the outside air inlet duct. •...
  • Page 30 Controls and features Displaying outside temperature Press EXT to display the outside air temperature. It will be displayed until EXT is pressed again. AUTO If the selected temperature is changed while the outside temperature is displayed, the new temperature will be displayed for four seconds after it is changed, then the outside temperature will return to the window.
  • Page 31 Controls and features • If your vehicle has been parked with the windows closed during hot weather, the air conditioner will do a much faster job of cooling if you drive for two or three minutes with the windows open. This will force most of the hot, stale air out of the vehicle.
  • Page 32 Controls and features Volume/power control Press the control to turn the audio VOL - PUSH ON system on or off. Turn the control to raise or lower volume. VOL - PUSH ON If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal”...
  • Page 33 Controls and features Tune adjust The tune control works in radio mode. Tune adjust in radio mode • Press to move to the next SEEK frequency down the band (whether or not a listenable TUNE station is located there). Hold the control to move through the frequencies quickly.
  • Page 34 Controls and features Setting memory preset stations 1. Select the frequency band with the AM or the FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.
  • Page 35 Controls and features Speaker balance adjust Speaker sound distribution can be adjusted between the right and left speakers. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. FADE Tape select • To enter tape mode while in radio mode, press the TAPE AMS control.
  • Page 36 Controls and features In order to ensure proper operation of the AMS feature, the tape MUST have a blank section of at least four seconds duration between programs. Rewind The rewind control works in tape SIDE 1 - 2 mode. To rewind in tape mode, press the REW control.
  • Page 37 Controls and features Press CLK to toggle between listening frequencies and clock mode while in radio mode. To set the hour, press and hold the CLK control and press: TAPE • to decrease hours and • to increase hours. SEEK SEEK TUNE TUNE...
  • Page 38 Controls and features Anytime that the media is changed, (new radio station, etc.), the media information will again display for 10 seconds before reverting back to the clock. In media mode, the media information will always be displayed. Premium AM/FM Stereo/Cassette (CD Changer Compatible) BASS TREB FADE...
  • Page 39 Controls and features Your audio system is equipped with selective lighting, a unique lighting strategy. This lighting feature is operable when the headlamps are illuminated. During the operation of any selected mode, lighting for the individual function controls will either illuminate or turn off. Those controls which have a function for the specific mode of operation selected will be lit, while the controls which have no function for that mode will be turned off.
  • Page 40 Controls and features With the radio on, press and hold the volume control for five seconds, until the display reads SPEED VOL #, then press: PUSH ON • to increase volume compensation • to decrease or shut off the volume compensation AM/FM select The AM/FM select control works in radio, tape and CD modes (if...
  • Page 41 Controls and features AM/FM select in radio mode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FM select in tape mode Press this control to stop tape play and begin radio play. AM/FM select in CD mode Press this control to stop CD play and begin radio play.
  • Page 42 Controls and features Seek function in tape mode • Press to listen to the previous SEEK selection on the tape or return to the beginning of the current selection. • Press to listen to the next selection on the tape. Seek function for CD changer •...
  • Page 43 Controls and features Radio station memory preset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Setting memory preset stations 1.
  • Page 44 Controls and features Bass adjust The bass adjust control allows you to increase or decrease the audio BASS system’s bass output. Press the BASS control. Use the TREB SEL control to increase or decrease the amount of bass. Treble adjust The treble adjust control allows you to increase or decrease the audio BASS...
  • Page 45 Controls and features • To begin CD play (if equipped TAPE with CD changer), ensure that the CDs are loaded. Press the CD control. The first track of the disc will begin playing. After that, CD play will begin where it stopped last. Rewind The rewind control works in tape and CD modes.
  • Page 46 Controls and features Dolby noise reduction Dolby noise reduction operates only in tape mode. Dolby reduces the amount of hiss and static during tape playback. Press the control to activate (and deactivate) Dolby noise reduction. The noise reduction system is manufactured under license from Dolby Laboratories Licensing Corporation.
  • Page 47 Controls and features Press the RDS control. Use the SEL control to select ON or OFF to enable or disable the feature. With the RDS activated, press the SEL control to scroll through the following selections: Traffic • Press the RDS control until TRAFFIC is displayed.
  • Page 48 Controls and features • Rock • Soft • Top 40 Show • With RDS activated, press the RDS control until SHOW is displayed. • Use the SEL control to select TYPE (the display shows the program type), NAME (the display shows the call letters of the station) or NONE.
  • Page 49 Controls and features These effects will change the sound quality and may need to be adjusted based upon the program material to suit your listening needs. Press the control to turn the feature on or off. Use the SEL control to select the desired signal mode (the selected mode will appear in the display).
  • Page 50 Controls and features Use the SEL control to manually set the time. • Press to increase hours/minutes. • Press to decrease hours/minutes. CD changer (if equipped) Your CD changer is located in the trunk. Slide the door to access the CD changer magazine.
  • Page 51 Controls and features 5. Insert one disc into each CD tray of the magazine (up to 6 discs). Ensure that the label side is facing If you pull too hard on the disc holder, the disc holder may come completely out of the magazine. If this happens, reinsert the disc holder back into the magazine.
  • Page 52 Controls and features Radio power must be turned on to play the CDs in the changer. The magazine may be stored in the glove compartment when not being used. The CD magazine may be inserted or ejected with the radio power off. Do not insert any promotional (odd shaped or sized) discs into the CD changer as that jamming may occur.
  • Page 53 Controls and features Cleaning cassette player (if equipped) Clean the tape player head with a cassette cleaning cartridge after 10 to 12 hours of play in order to maintain the best sound and operation. Cassette and cassette player care • Use only cassettes that are 90 minutes long or less. •...
  • Page 54 Controls and features • Station overload. Weak signals are sometimes captured by stronger signals when you pass a broadcast tower. A stronger signal may temporarily overtake a weaker signal and play while the weak station frequency is displayed. The audio system automatically switches to single channel reception if it will improve the reception of a station normally received in stereo.
  • Page 55 Controls and features Press the left control to decrease the time displayed. AUXILIARY POWER POINT The auxiliary power point is located under the instrument panel. This BASS TREB FADE PUSH ON outlet should be used in place of the TAPE SEEK TUNE SCAN...
  • Page 56 Controls and features KEY SYSTEM The vehicle is equipped with a master key and valet key lock system. The master key will actuate doors, trunk, glove box, ignition and remote trunk release. The valet key (marked “valet”) will actuate doors and ignition only.
  • Page 57 Controls and features WINDSHIELD WIPER/WASHER CONTROLS Rotate the windshield wiper control to the desired interval, low or high speed position. The bars of varying length are for intermittent wipers. When in this position rotate the control upward for fast intervals and downward for slow intervals.
  • Page 58 Controls and features Do not shift the gearshift lever into N (Neutral) with the speed control on. To turn speed control off • Press OFF or • Turn off the vehicle ignition. Once speed control is switched off, the previously programmed set speed will be erased.
  • Page 59 Controls and features Do not use the speed control in heavy traffic or on roads that are winding, slippery, or unpaved. To set a higher set speed • Press and hold SET/SET ACC/ SET ACCEL. Release the control when the desired vehicle speed is reached or ACCEL •...

  • Page 60: Speed Control

    Controls and features To disengage speed control • Depress the brake pedal. Disengaging the speed control will not erase the previously programmed set speed. Pressing OFF will erase the previously programmed set speed. To return to a previously set speed •...
  • Page 61 Controls and features STEERING WHEEL CONTROLS (IF EQUIPPED) These controls allow you to operate some radio and climate control features. Radio control features • Press BAND/MODE to select AM, FM1, FM2, TAPE or CD (if equipped). In Radio mode: NEXT •...
  • Page 62 Controls and features Deactivating overdrive Press the Transmission Control Switch (TCS) located on the end of the gearshift lever. The ON/OFF Transmission Control Indicator Light (TCIL) will illuminate on the instrument cluster. The transmission will operate in all gears except overdrive. To return to normal overdrive mode, press the ON/OFF Transmission Control Switch again.
  • Page 63 Controls and features Programming 1. Prepare for programming the HomeLink Universal Transceiver by erasing the three factory default codes by holding down the two outside buttons until the red light begins to flash after 20 seconds. Release both buttons. 2. Hold the end of your hand-held transmitter 5–14 cm (2–5 inches) away from the HomeLink Universal Transceiver surface (located on your visor) while keeping the red light in...
  • Page 64 Controls and features To program your hand-held transmitters: • continue to hold the button on the HomeLink Universal Transceiver. • press and re-press the hand-held transmitter button every two seconds until the red light changes from a slow to a fast flash. Operating the HomeLink Universal Transceiver Once programmed, the HomeLink Universal Transceiver can be used in...
  • Page 65 Controls and features 3. Press and release the programmed HomeLink button. Press and release the HomeLink button a second time to complete the training process. (Some garage door openers may require this procedure to be done a third time to complete the training). The 2nd or 3rd press from step 3 will activate the door.
  • Page 66 Controls and features MOON ROOF (IF EQUIPPED) To open the moon roof: • Press and release the control. • For one-touch operation, press and release the rear portion of the control; this will fully open the moon roof. • To stop one-touch operation at the desired position, press and release the forward portion of the control.
  • Page 67 Controls and features Do not block the sensor on the backside of the mirror since this may impair proper mirror performance. Press the control to turn the mirror on or off. The mirror will automatically return to the normal state whenever the COMP MIRROR vehicle is placed in R...
  • Page 68 Controls and features Fuel filler door override release If the remote release is inoperative, open the trunk, then pull the override release handle located inside the trunk to open the fuel filler door. POWER WINDOWS Express down To make the driver window open WINDOW LOCK fully without holding the window control, press the driver window...
  • Page 69 Controls and features Accessory delay (if equipped) With accessory delay, the window switches, radio, and moonroof may be used for up to ten minutes after the ignition switch is turned to the OFF position or until any door is opened. POWER DOOR LOCKS Press control to unlock or lock all doors.
  • Page 70 Controls and features Heated outside mirrors (if equipped) Both mirrors are heated automatically to remove ice, mist and fog when the rear window defrost is activated. Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place.
  • Page 71 Controls and features • To program position two, repeat the previous procedure using control 2. A position can only be set or recalled when the transmission gearshift is in Park or Neutral. A memory seat position may be programmed at any time. The memory seat positions are also recalled when you press your remote entry transmitter UNLOCK control.
  • Page 72 Controls and features Remote seat adjustment The rear passenger can move the front passenger seat forward or backword using the control located in the rear center console. Move the control forward or backward to move front passenger seat. Remote seat adjustment lockout The window lockout control, located WINDOW LOCK on the drivers door, will also lockout...
  • Page 73 Controls and features REMOTE ENTRY SYSTEM The remote entry system allows you to lock or unlock all vehicle doors without a key. The remote entry LOCK or UNLOCK operate with the ignition in the ON or OFF position and the transmission in P (Park). If there is any potential remote keyless entry problem with your vehicle, ensure ALL key fobs (remote entry transmitters) are brought to the dealership, to aid in troubleshooting.
  • Page 74 Controls and features 1. Turn ignition key to ON. 2. Press power door unlock control on the door panel 3 times. 3. Turn ignition key from ON to OFF. 4. Press power door unlock control 3 times. 5. Turn ignition key back to ON. The doors will lock and unlock. 6.
  • Page 75 Controls and features Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Replacing the battery The remote transmitter is powered by one coin type three-volt lithium battery CR2032 or equivalent. Typical operating range will allow you to be up to 10 meters (33 feet) away from your vehicle.
  • Page 76 Controls and features Replacing lost transmitters Take all your vehicle’s transmitters to your dealer if service is required. If you purchase additional transmitters (up to four may be programmed into memory), perform the following procedure: To reprogram the transmitters yourself, place the key in the ignition and turn from OFF to ON four times in rapid succession within 3 seconds.
  • Page 77 Controls and features • a door is opened and then closed • the vehicle is in a forward gear, and • you exceed 5 km/h (3 mph). Autolock can also be activated or deactivated using the following procedure: You must complete steps 1 through 7 within 30 seconds or the procedure will have to be repeated.
  • Page 78 Controls and features Reactivating the memory seat/mirrors feature The remote memory seat/mirrors feature comes disabled from the factory. The following sequence will reactivate the transmitter: 1. Press the SET control. 2. Press any control on the remote entry transmitter. 3. Within five seconds, press control one or two.
  • Page 79 Controls and features Programming your own entry code 1. Enter the factory-set code (keypad will illuminate when pressed). 2. Press the 1/2 control within five seconds of step 1. 7 8 9 0 3. Enter your personal 5–digit code. Enter each digit within five seconds of the previous one.
  • Page 80 Controls and features Unlocking the doors and releasing the trunk with the keyless entry system To unlock the driver door, enter either the factory-set code or personal code (each digit pressed within five seconds of prior digit). The interior lamps will illuminate. To unlock all doors, enter the factory-set code or personal code 7 8 9 0...
  • Page 81 Controls and features SECURILOCK PASSIVE ANTI-THEFT SYSTEM Your vehicle is equipped with a coded-key anti-theft system. Only the correct key will be able to start your vehicle. If your keys are lost or stolen, you must take your vehicle to your dealership for key reprogramming.
  • Page 82 Controls and features Theft indicator The theft indicator in the instrument cluster will operate as follows: • When the ignition is OFF, the theft indicator will flash briefly every two seconds to indicate the anti-theft system is protecting your vehicle. •...
  • Page 83 Controls and features Procedure to program spare SecuriLock keys to your vehicle New coded keys must have the correct mechanical key cut for your vehicle. Conventional (non-coded) keys cannot be programmed to your vehicle. You will need to have two previously programmed coded keys and the new unprogrammed SecuriLock key readily accessible for timely implementation of each step in the procedure.
  • Page 84 Controls and features INTERIOR LUGGAGE COMPARTMENT RELEASE (IF EQUIPPED) Your vehicle is equipped with a mechanical interior luggage compartment release handle that provides a means of escape for children and adults in the event they become locked inside the luggage compartment. Adults are advised to familiarize themselves with the operation and location of the release handle.

  • Page 85: Seating And Safety Restraints

    Seating and safety restraints SEATING Head restraints Your vehicle’s seats may be equipped with head restraints which are vertically adjustable. The purpose of these head restraints is to help limit head motion in the event of a rear collision. To properly adjust your head restraints, lift the head restraint so that it is located directly behind your head or as close to that position as possible.
  • Page 86 Seating and safety restraints Press the control to recline the seatback forward or backward. Press to move the seat forward or backward. Press to move the front portion of the seat cushion up or down. Press to move the rear portion of the seat cushion up or down.
  • Page 87 Seating and safety restraints Adjusting the power seats – seat mounted controls Never adjust the driver’s seat or seatback when the vehicle is moving. Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Reclining the seatback can reduce the effectiveness of the seat’s safety belt in the event of a collision.
  • Page 88 Seating and safety restraints • Rotate the thumbwheel to select the desired heat (from 0 (OFF) to 5 (HI)). Allow five minutes for the heat level to stabilize. If the heated seat switch is not turned OFF, the seat will heat up to the selected temperature level each time the vehicle is started.
  • Page 89 Seating and safety restraints To adjust the front seatback using the manual recliner: • Lift and hold the handle located on the side of the seat. • Lean against the seatback to adjust it to your desired position. You can recline the seat back or bring it forward.
  • Page 90 Seating and safety restraints The memory seat positions are also recalled when you press your remote entry transmitter UNLOCK control. To program the memory seat to remote entry transmitter, refer to Remote entry system in the Controls and features chapter. SAFETY RESTRAINTS Safety restraints precautions Always drive and ride with your seatback upright and the lap...
  • Page 91 Seating and safety restraints Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair. 1) Use the shoulder belt on the outside shoulder only.
  • Page 92 Seating and safety restraints Vehicle sensitive mode The vehicle sensitive mode is the normal retractor mode, allowing free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of approximately 8 km/h (5 mph) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers.
  • Page 93 Seating and safety restraints • Grasp the shoulder portion and pull downward until the entire belt is extracted. • Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.
  • Page 94 Seating and safety restraints Position the shoulder belt height adjuster so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a collision. Lap belts Adjusting the front center seat lap belt (if equipped) The lap belt does not adjust automatically.
  • Page 95 Seating and safety restraints Safety belt extension assembly If the safety belt assembly is too short, even when fully extended, 20 cm (8 inches) can be added to the safety belt assembly by adding a safety belt extension assembly (part number 611C22). Safety belt extension assemblies can be obtained from your dealer at no cost.
  • Page 96 Seating and safety restraints If... Then... The driver’s safety belt is not The Belt Minder feature is buckled before the vehicle has activated - the safety belt warning reached at least 5 km/h (3 mph) light illuminates and the warning and 1-2 minutes have elapsed chime sounds for 6 seconds every since the ignition switch has been...
  • Page 97 Seating and safety restraints Reasons given... Consider... Seat belts don’t Safety belts, when used properly, reduce risk work of death to front seat occupants by 45% in cars, and by 60% in light trucks. Traffic is light Nearly 1 of 2 deaths occur in single-vehicle crashes, many when no other vehicles are around.
  • Page 98 Seating and safety restraints Before following the procedure, make sure that: • the parking brake is set • the gearshift is in P (Park) (automatic transmission). • the ignition switch is in the OFF position • all vehicle doors are closed •...
  • Page 99 Seating and safety restraints 9. After receiving confirmation, the deactivation/activation procedure is complete. Safety belt maintenance Inspect the safety belt systems periodically to make sure they work properly and are not damaged. Inspect the safety belts to make sure there are no nicks, wears or cuts, replacing if necessary. All safety belt assemblies, including retractors, buckles, front seat belt buckle assemblies, buckle support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seatback (if...
  • Page 100 Seating and safety restraints collision including information about the air bag system and impact severity. This information will assist Ford in the servicing of your vehicle and may help Ford better understand rear world collisions and further improve the safety of future vehicles. Important supplemental restraint system (SRS) precautions The supplemental restraint system is designed to work with the safety...
  • Page 101 Do not attempt to service, repair, or modify the Air Bag Supplemental Restraint System or its fuses. See your Ford or Lincoln-Mercury dealer. Children and air bags For additional important safety information, read all information on safety restraints in this guide.
  • Page 102 Seating and safety restraints How does the air bag supplemental restraint system work? The air bag SRS is designed to activate when the vehicle sustains longitudinal deceleration sufficient to cause the sensors to close an electrical circuit that initiates air bag inflation.
  • Page 103 Seating and safety restraints Several air bag system components get hot after inflation. Do not touch them after inflation. If the air bag is inflated, the air bag will not function again and must be replaced immediately. If the air bag is not replaced, the unrepaired area will increase the risk of injury in a collision.
  • Page 104 Do not attempt to service, repair, or modify the air bag Supplemental Restraint System, its fuses or the seat cover on a seat containing an air bag. See your Ford or Lincoln Mercury dealer. All occupants of the vehicle including the driver should always...
  • Page 105 Seating and safety restraints How does the side air bag system work? The side air bag system consists of the following: • An inflatable nylon bag (air bag) with a gas generator concealed behind the outboard bolster of the driver and front passenger seatbacks.
  • Page 106 Seating and safety restraints Several air bag system components get hot after inflation. Do not touch them after inflation. If the side air bag has deployed, the air bag will not function again. The side air bag system (including the seat) must be inspected and serviced by a qualified technician in accordance with...
  • Page 107 Seating and safety restraints Disposal of air bags and air bag equipped vehicles (including pretensioners) For disposal of air bags or air bag equipped vehicles, see your local dealership or qualified technician. Air bags MUST BE disposed of by qualified personnel. SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safety restraints for children.
  • Page 108 Seating and safety restraints neck, the child should wear the lap and shoulder belt. Moving the child closer to the center of the vehicle may help provide a good shoulder belt fit. Do not leave children, unreliable adults, or pets unattended in your vehicle.
  • Page 109 Seating and safety restraints When installing a child safety seat: • Review and follow the information presented in the Air Bag Supplemental Restraint System section in this chapter. • Use the correct safety belt buckle for that seating position. • Insert the belt tongue into the proper buckle until you hear a snap and feel it latch.
  • Page 110 Seating and safety restraints Installing child safety seats in combination lap and shoulder belt seating positions 1. Position the child safety seat in a seat with a combination lap and shoulder belt. An air bag can kill or injure a child in a child seat. If you must use a forward-facing child seat in the front seat, move seat all the way back.
  • Page 111 Seating and safety restraints 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until...
  • Page 112 Seating and safety restraints 7. Pull the lap belt portion across the child seat toward the buckle and pull up on the shoulder belt while pushing down with your knee on the child seat. 8. Allow the safety belt to retract to remove any slack in the belt.
  • Page 113 Seating and safety restraints The tether strap anchors in your vehicle are in the following positions (shown from top view): Attach the tether strap only to the appropriate tether anchor as shown. The tether strap may not work properly if attached somewhere other than the correct tether anchor.
  • Page 114 Seating and safety restraints 6. Refer to the Installing child safety seats in combination lap and shoulder belt seating positions section of this chapter for further instructions to secure the child safety seat. 7. Tighten the child safety seat tether strap according to the manufacturer’s instructions.

  • Page 115: Starting

    Starting PREPARING TO START YOUR VEHICLE Engine starting is controlled by the ignition system. This system meets all Canadian Interference-Causing Equipment standard requirements regulating the impulse electrical field strength of radio noise. When starting a fuel-injected engine, avoid pressing the accelerator before or during starting.
  • Page 116 Starting 2. Make sure the headlamps and vehicle accessories are off. 3. Make sure the parking brake is set. 4. Make sure the gearshift is in P (Park). 5. Turn the key to 4 (ON) without turning the key to 5 (START). If there is difficulty in turning the key, firmly rotate the steering wheel left and right until the key turns...
  • Page 117 Starting Make sure the corresponding lights illuminate briefly. If a light fails to illuminate, have the vehicle serviced. • If the driver’s safety belt is fastened, the light may not illuminate. STARTING THE ENGINE 1. Turn the key to 5 (START) without pressing the accelerator pedal and release as soon as the engine starts.
  • Page 118 Starting To prevent electrical shock, do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters. Guarding against exhaust fumes Although odorless and colorless, carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects. If you ever smell exhaust fumes of any kind inside your vehicle, have your dealer inspect and fix your vehicle immediately.

  • Page 119: Driving

    Driving BRAKES Your service brakes are self-adjusting. Refer to the scheduled maintenance guide for scheduled maintenance. Occasional brake noise is normal and often does not indicate a performance concern with the vehicle’s brake system. In normal operation, automotive brake systems may emit occasional or intermittent squeal or groan noises when the brakes are applied.
  • Page 120 Driving ABS warning lamp warning lamp in the instrument cluster momentarily illuminates when the ignition is turned to the ON position. If the light does not illuminate momentarily at start up, remains on or continues to flash, the ABS needs to be serviced. With the ABS light on, the anti-lock brake system is disabled and normal BRAKE...
  • Page 121 Driving The BRAKE warning lamp in the instrument cluster illuminates and BRAKE remains illuminated (when the ignition is turned ON) until the parking brake is fully released. Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn off the ignition whenever you leave your vehicle.
  • Page 122 Driving your vehicle. It is especially useful on slippery and/or hilly road surfaces. The system operates by detecting and controlling wheel spin. The system borrows many of the electronic and mechanical elements already present in the anti-lock braking system (ABS). Wheel-speed sensors allow excess rear wheel spin to be detected by the Traction Control portion of the ABS computer.
  • Page 123 Driving STEERING Your vehicle is equipped with power steering. Power steering uses energy from the engine to help steer the vehicle. To prevent damage to the power steering pump: • Never hold the steering wheel to the extreme right or the extreme left for more than a few seconds when the engine is running.
  • Page 124 Driving If you exceed the load limit, the rear air suspension may not operate. The air suspension shut-off switch is located on the left side of the trunk. AIR SUSPENSION SWITCH If this switch is in the OFF position, INTERRUPTEUR DE the rear air suspension will not LA SUSPENSION operate.
  • Page 125 Driving If your vehicle gets stuck in mud or snow it may be rocked out by shifting from forward and reverse gears, stopping between shifts, in a steady pattern. Press lightly on the accelerator in each gear. Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur.
  • Page 126 Driving R (Reverse) With the gearshift lever in R (Reverse), the vehicle will move backward. Always come to a complete stop before shifting into and out of R (Reverse). N (Neutral) With the gearshift lever in N (Neutral), the vehicle can be started and is free to roll.
  • Page 127 Driving • towing a trailer up or down steep hills. • additional engine braking is desired. If towing a trailer, refer to Driving while you tow in the Trailer Towing chapter. To return to Overdrive mode, press the transmission control switch. The O/D OFF indicator light will no longer be illuminated.
  • Page 128 Driving VEHICLE LOADING Before loading a vehicle, familiarize yourself with the following terms: • Base Curb Weight: Weight of the vehicle including any standard equipment, fluids, lubricants, etc. It does not include passengers or aftermarket equipment. • Payload: Combined maximum allowable weight of cargo, passengers and optional equipment.
  • Page 129 Driving Do not exceed the GVWR or the GAWR specified on the certification label. Do not use replacement tires with lower load carrying capacities than the originals because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with a higher limit than the originals do not increase the GVWR and GAWR limitations.
  • Page 130 Driving Towing trailers beyond the maximum recommended gross trailer weight could result in engine damage, transmission/axle damage, structural damage, loss of control, and personal injury. Preparing to tow Use the proper equipment for towing a trailer, and make sure it is properly attached to your vehicle.
  • Page 131 Driving Driving while you tow Do not drive faster than 88 km/h (55 mph) when towing a trailer. Speed control may shut off if you are towing on long, steep grades. When towing a trailer: • Use a lower gear when towing up or down steep hills. This will eliminate excessive downshifting and upshifting for optimum fuel economy and transmission cooling.
  • Page 132 Driving Exceeding these limits may allow water to enter critical vehicle components, adversely affecting driveability, emissions, reliability and causing internal transmission damage. Replace the rear axle lubricant anytime the axle has been submerged in water. Rear axle lubricant quantities are not to be checked or changed unless a leak is suspected or repair required.

  • Page 133: Roadside Emergencies

    In the United States, this card is found in the Owner Guide portfolio in the glove compartment in Ford vehicles and is mailed to you if you own a Mercury or Lincoln. In Canada, it is found in the Roadside Assistance book in the glove compartment.
  • Page 134 In the United States, you may purchase additional roadside assistance coverage beyond this period through the Ford Auto Club by contacting your Ford or Lincoln Mercury dealer. HAZARD FLASHER Use only in an emergency to warn traffic of vehicle breakdown, approaching danger, etc.
  • Page 135 Roadside emergencies The fuel pump shut-off switch is located on a bracket inside of the luggage compartment. Use the following procedure to reset the fuel pump shut-off switch. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3.
  • Page 136 Roadside emergencies Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. Standard fuse amperage rating and color COLOR Cartridge Fuse Mini Standard...
  • Page 137 Roadside emergencies RELAY The fuses are coded as follows. Fuse/Relay Fuse Amp Passenger Compartment Location Rating Fuse Panel Description Lighting Control Module (LCM), Left-Hand Low Beam Headlamp EATC Blower Motor Lighting Control Module (LCM), Right-Hand Low Beam Headlamp 7.5A Instrument Cluster 7.5A Lighting Control Module (LCM), Park/Tail Lamps...
  • Page 138 Roadside emergencies Fuse/Relay Fuse Amp Passenger Compartment Location Rating Fuse Panel Description Electronic Crash Sensor (Airbag) Instrument Cluster, Anti-Theft, Ignition Switch, Ignition Coils Anti-Lock Brake Module, Traction Control Switch 7.5A Transmission Control Switch, Lighting Control Module (LCM) Multi-Function Switch, Turn Signals Wiper Control Module (WCM), Windshield Wiper Motor Digital Transmission Range (DTR) Sensor,...
  • Page 139 Roadside emergencies Fuse/Relay Fuse Amp Passenger Compartment Location Rating Fuse Panel Description 7.5A LF Seat Module, Trunk Lid Release Switch, Door Lock Switches, LF Seat Control Switch, LF Door Module, Power Mirror Switch 7.5A Main Light Switch, Lighting Control Module (LCM) Front Radio Control Unit, Digital Compact Disk Changer, Cellular Telephone...
  • Page 140 Roadside emergencies RELAY RELAY RELAY RELAY DIODE RELAY The high-current fuses are coded as follows. Fuse/Relay Fuse Amp Power Distribution Box Description Location Rating 50A** Ignition Switch 40A** Ignition Switch 50A** Cooling Fan-High Speed 30A** PCM Power Relay 40A** I/P Fuse Panel, Fuses 10, 19, 21, 23, 25, 27 30A** Starting System 50A**...
  • Page 141 Roadside emergencies Fuse/Relay Fuse Amp Power Distribution Box Description Location Rating 30A** Air Suspension 15A* Charging System 20A* Fuel Pump — NOT USED 30A* Heated Seats 10A* Air Suspension 15A* Horn 30A* Subwoofer, I/P Fuse Panel, Fuse 33 15A* Fuel Injectors 15A* Heated Oxygen Sensors, Transmission Solenoids, EVAP Canaster Vent Solenoid,...
  • Page 142 Roadside emergencies Temporary spare tire information Your vehicle may have a temporary or full-size spare tire. The temporary spare tire for your vehicle is labeled as such. It is smaller than a regular tire and is designed for emergency use only. Replace this tire with a full-size tire as soon as possible.
  • Page 143 Roadside emergencies 3. Remove the spare tire and the jack and lug wrench from under the spare tire. 4. Remove the center ornament from the aluminum wheel with the tapered end of the wheel nut wrench that came with your vehicle. Insert and twist the handle, then pry against the wheel.
  • Page 144 Roadside emergencies 6. Locate the jack notch on the frame next to the door closest to the tire you are changing, then place the jack on the frame rail directly behind the notch. Turn the jack handle clockwise until the wheel is completely off the ground.
  • Page 145 (not the dealer) to get a replacement key. If the lug wrench/lug nut key assembly is lost, see your nearest Ford or Lincoln/Mercury dealer who has access to the master set of keys. Do not use an impact wrench with the anti-theft key.
  • Page 146 Roadside emergencies Do not attempt to push start your vehicle. Automatic transmissions do not have push-start capability. Preparing your vehicle 1. Use only a 12–volt supply to start your vehicle. 2. Do not disconnect the battery of the disabled vehicle as this could damage the vehicle’s electrical system.
  • Page 147 Roadside emergencies 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’s engine, away from the battery and the carburetor/fuel injection system.
  • Page 148 Roadside emergencies Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. 5. Ensure that the cables are clear of fan blades, belts, moving parts of both engines, or any fuel delivery system parts.
  • Page 149 Roadside emergencies 2. Remove the jumper cable on the negative (-) connection of the booster vehicle’s battery. 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery. 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’s battery.
  • Page 150 Roadside emergencies After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions. WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or, if you are a member, your roadside assistance center.

  • Page 151: Maintenance And Care

    Maintenance and care SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the engine compartment for easy location. • We provide a Scheduled Maintenance Guide which makes tracking routine service easy. If your vehicle requires professional service, your dealership can provide necessary parts and service.
  • Page 152 Maintenance and care Working with the engine off 1. Set the parking brake and ensure the gearshift is securely latched in P (Park). 2. Turn off the engine and remove the key. 3. Block the wheels to prevent the vehicle from moving unexpectedly. Working with the engine on 1.
  • Page 153 Maintenance and care IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 4.6L SOHC V8 engine 1. Brake fluid reservoir 2. Engine oil dipstick 3. Engine oil filler cap 4. Air filter assembly 5. Power steering fluid reservoir 6. Engine coolant reservoir 7. Battery 8.
  • Page 154 Maintenance and care ENGINE OIL Checking the engine oil Refer to the Scheduled Maintenance Guide for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan.
  • Page 155 Maintenance and care • If the oil level is within this range, the oil level is acceptable. DO NOT ADD OIL. DO NOT OVERFILL • If the oil level is below this mark, engine oil must be added to raise the level within the normal operating range.
  • Page 156 Maintenance and care 3. Recheck the engine oil level. Make sure the oil level is not above the MAX mark on the engine oil level indicator (dipstick). 4. Install the indicator and ensure it is fully seated. 5. Fully install the engine oil filler cap by turning the filler cap clockwise until three clicks can be heard.
  • Page 157 Maintenance and care BRAKE FLUID Checking and adding brake fluid Brake fluid should be checked and refilled as needed. Refer to the Scheduled Maintenance Guide for the service interval schedules. 1. Clean the reservoir cap before removal to prevent dirt or water from entering the reservoir.
  • Page 158 Maintenance and care WINDSHIELD WASHER FLUID Checking and adding washer fluid Check the washer fluid whenever you stop for fuel. If the level is low, add enough fluid to fill the reservoir. In very cold weather, do not fill the reservoir all the way.
  • Page 159 Maintenance and care The engine coolant must be maintained at the correct fluid level and concentration to work properly. If the engine coolant fluid level and concentration is not maintained correctly, damage to the engine and cooling system may result. When the engine is cold, check the level of the engine coolant in the reservoir.
  • Page 160 Maintenance and care • DO NOT USE a DEX-COOL engine coolant or an equivalent engine coolant that meets Ford specification WSS-M97B44-D. • DO NOT USE alcohol or methanol antifreeze or any engine coolants mixed with alcohol or methanol antifreeze. • DO NOT USE supplemental coolant additives in your vehicle. These additives may harm your engine’s cooling system.
  • Page 161 Maintenance and care To avoid scalding hot steam or coolant from being released from the engine cooling system, never remove the radiator cap while the engine is running or hot. Failure to follow this warning may result in damage to the engine’s cooling system and possible severe personal injury.
  • Page 162 Maintenance and care • NEVER increase the coolant concentration above 60%. • increased engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage. • refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate freeze protection at the temperatures in which you drive in the winter months.
  • Page 163 Maintenance and care How fail-safe cooling works If the engine begins to overheat: • the engine coolant temperature gauge will move to the H (hot) area. • the symbol will illuminate. • a tone will sound 3 times. • the Service Engine Soon indicator light will illuminate.
  • Page 164 Maintenance and care Never remove the coolant reservoir cap while the engine is running or hot. 5. Re-start the engine and take your vehicle to a service facility. Driving the vehicle without repairing the engine problem increases the chance of engine damage. Take your vehicle to a service facility as soon as possible.
  • Page 165 Maintenance and care 5. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir. TRANSMISSION FLUID Checking automatic transmission fluid Refer to your Scheduled Maintenance Guide for scheduled intervals for fluid checks and changes.
  • Page 166 Maintenance and care Correct fluid level The transmission fluid should be checked at normal operating temperature 66°C-77°C (150°F-170°F) on a level surface. The normal operating temperature can be reached after approximately 30 km (20 miles) of driving. You can check the fluid without driving if the ambient temperature is above 10°C (50°F).
  • Page 167 Maintenance and care If an overfill occurs, excess fluid should be removed by a qualified technician. An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. BATTERY Your vehicle is equipped with a Motorcraft maintenance-free battery which normally does not require additional water during its life of service.
  • Page 168 Maintenance and care Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation.
  • Page 169 Maintenance and care • If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned. If the battery has been disconnected or a new battery has been installed, the clock must be reset once the battery is reconnected.
  • Page 170 Maintenance and care 6. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated.
  • Page 171 Maintenance and care To replace the wiper blades: 1. Pull the wiper arm away from the windshield and lock into the service position. 2. Turn the blade at an angle from the wiper arm. Push the lock pin manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm.
  • Page 172 Maintenance and care Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100.
  • Page 173 Maintenance and care SERVICING YOUR TIRES Checking the tire pressure • Use an accurate tire pressure gauge. • Check the tire pressure when tires are cold, after the vehicle has been parked for at least one hour or has been driven less than 5 km (3 miles).
  • Page 174 Maintenance and care Replacing the tires Replace the tires when the wear band is visible through the tire treads. When replacing full size tires, never mix radial bias-belted, or bias-type tires. Use only the tire sizes that are listed on the Certification Label.
  • Page 175 Maintenance and care wheels (of the same size and specifications) be used as chains may chip aluminum wheels. Follow these guidelines when using snow tires and chains: • Use only SAE Class S chains. • Install chains securely, verifying that the chains do not touch any wiring, brake lines or fuel lines.
  • Page 176 Maintenance and care Gasoline may contain benzene, which is a cancer-causing agent. Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materials and any open flames before fueling your vehicle. • Always turn off the vehicle before fueling.
  • Page 177 Maintenance and care When refueling always shut the engine off and never allow sparks or open flames near the filler neck. Never smoke while refueling. Fuel vapor is extremely hazardous under certain conditions. Care should be taken to avoid inhaling excess fumes. The flow of fuel through a fuel pump nozzle can produce static electricity, which can cause a fire if fuel is pumped into an ungrounded fuel container.
  • Page 178 Maintenance and care be void for any damage to the fuel tank or fuel system if the correct genuine Ford or Motorcraft fuel filler cap is not used. The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap.
  • Page 179 Maintenance and care unleaded gasoline should not be used (particularly in the United States) if “Regular” unleaded gasoline is recommended because it may cause these problems to become more pronounced. If the problems persist, see your dealer or a qualified service technician. It should not be necessary to add any aftermarket products to your fuel tank if you continue to use a high quality fuel.
  • Page 180 Maintenance and care ESSENTIALS OF GOOD FUEL ECONOMY Measuring techniques Your best source of information about actual fuel economy is you, the driver. You must gather information as accurately and consistently as possible. Fuel expense, frequency of fillups or fuel gauge readings are NOT accurate as a measure of fuel economy.
  • Page 181 Maintenance and care Calculating fuel economy 1. Fill the fuel tank completely and record the initial odometer reading (in kilometers or miles). 2. Each time you fill the tank, record the amount of fuel added (in liters or gallons). 3. After at least three to five tank fill-ups, fill the fuel tank and record the current odometer reading.
  • Page 182 Maintenance and care • Using the air conditioner or defroster may reduce fuel economy. • You may want to turn off the speed control in hilly terrain if unnecessary shifting between third and fourth gear occurs. Unnecessary shifting of this type could result in reduced fuel economy.
  • Page 183 Maintenance and care EPA window sticker Every new vehicle should have the EPA window sticker. Contact your dealer if the window sticker is not supplied with your vehicle. The EPA window sticker should be your guide for the fuel economy comparisons with other vehicles.
  • Page 184 Maintenance and care Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. Do not make any unauthorized changes to your vehicle or engine. By law, vehicle owners and anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles are not permitted to intentionally remove an emission control device or prevent it from working.
  • Page 185 Maintenance and care BULBS Replacing exterior bulbs Check the operation of the following lamps frequently: • Headlamps • Tail lamps • Brakelamps • High-mount brakelamp • Turn signals • Backup lamps • License plate lamp Do not remove lamp bulbs unless they will be replaced immediately. If a bulb is removed for an extended period of time, contaminants may enter the lamp housings and affect performance.
  • Page 186 Maintenance and care 4. Remove headlamp by taking the retainer pins out. Pull headlamp forward to access bulb connector. 5. Disconnect the electrical connector from the bulb by pulling rearward. 6. Remove the bulb retaining ring by rotating it counterclockwise (when viewed from the rear) to free it from the bulb socket, and slide the ring off the plastic base.
  • Page 187 Maintenance and care To install the new bulb: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
  • Page 188 Maintenance and care 5. Disconnect the electrical connector from the bulb socket. 6. Rotate the bulb socket counterclockwise and remove from lamp assembly. 7. Carefully pull the bulb straight out of socket and push in the new bulb. 8. To complete installation, follow the removal procedure in reverse order.
  • Page 189 Maintenance and care Replacing the interior bulbs Check the operation of the following interior bulbs frequently: • interior overhead lamp • map lamp For bulb replacement, see a dealer or qualified technician. Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must also have authorized “D.O.T.”...
  • Page 190 Maintenance and care A bubble (vertical indicator) that is not centered between the two red lines does not necessarily indicate out-of-aim headlamps. If your vehicle is not positioned on a level surface, the slope will be included in the vertical indication. Therefore, vertical and horizontal headlamp adjustment should be performed only when the beam direction appears to be incorrect.
  • Page 191 Maintenance and care Vertical aim adjustment 1. Park the vehicle on a level surface. 2. With the hood open, remove protective cover, then locate the bubble level and the vertical adjustment screw. The adjustment screw is located on the outboard side of the headlamp.
  • Page 192 Maintenance and care During winter months, it is especially important to wash the vehicle on a regular basis. Large quantities of dirt and road salt are difficult to remove and also cause damage to the vehicle. Remove any exterior accessories, such as antennas, before entering a car wash.
  • Page 193 Maintenance and care The brushes used in some automatic car washes may damage the finish on your wheels. Before going to a car wash, find out if the brushes are abrasive. Cleaning non-painted plastic exterior parts Use vinyl cleaner for routine cleaning. Clean with a tar remover if necessary.
  • Page 194 Maintenance and care Cleaning the engine Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. The high pressure fluid could penetrate the sealed parts and cause damage.
  • Page 195 Maintenance and care Avoid cleaner or polish that increases the gloss of the upper portion of the instrument panel. The dull finish in this area helps protect the driver from undesirable windshield reflection. Cleaning seats equipped with side air bags Remove dust and loose dirt with a whisk broom or a vacuum cleaner.

  • Page 196: Capacities And Specifications

    Capacities and specifications Do not use household cleaning products, alcohol solutions, solvents or cleaners intended for rubber, vinyl or plastics. Cleaning the interior fabric Remove dust and loose dirt with a whisk broom or a vacuum cleaner. Remove fresh spots immediately. Do not use household or glass cleaners. These agents can stain and discolor the fabric.
  • Page 197 Capacities and specifications Fluid Ford Part Name Capacity Rear axle lubricant Motorcraft SAE 80W-90 Premium Rear 1.8L (3.75 pints) Axle Lubricant Windshield washer Ultra-Clear Windshield Fill to line on reservoir fluid Washer Concentrate Use only brake fluids certified to meet Ford specifications. Refer to Lubricant Specifications in this chapter.
  • Page 198 Capacities and specifications LUBRICANT SPECIFICATIONS Item Ford part Ford part Ford name number specification Brake fluid High C6AZ-19542-AB ESA-M6C25-A Performance and DOT 3 DOT 3 Motor Vehicle Brake Fluid Door Silicone F7AZ-19G208-BA ESR-M13P4-A weatherstrips Lubricant F5AZ-19553-AA Engine coolant Ford Premium E2FZ-19549-AA ESE-M97B44-A Engine Coolant...
  • Page 199 Capacities and specifications Use only brake fluids certified to meet Ford specifications. DOT 3 fluid is recommended. However, if DOT 3 is not available, DOT 4 fluid can be used. Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axles.
  • Page 200 Capacities and specifications...

  • Page 201: Certification Label

    Capacities and specifications IDENTIFYING YOUR VEHICLE Certification label The National Highway Traffic Safety MFD. BY FORD MOTOR CO. IN U.S.A. Administration Regulations require DATE: XXXXX GVWR:XXXXX LB/ XXXXX KG that a Certification Label be affixed FGAWR: XXXXXX/XXXXXXX RGAWR: XXXXXXX/XXXXXXX THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL to a vehicle and prescribe where the MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE Certification Label may be located.
  • Page 202 Capacities and specifications Vehicle identification number The vehicle identification number is attached to a metal tag and is located on the driver side XXXXXXXXXXXXXXXXX instrument panel. (Please note that in the graphic XXXX is representative of your vehicle identification number.) Engine number The engine number (the last eight numbers of the vehicle identification number) is stamped on the engine block, transmission, frame and...

  • Page 203: Customer Assistance

    • Other benefits during the warranty period (such as reimbursement for rentals and towing) You may purchase Ford ESP from any participating Ford and Lincoln/ Mercury and Ford of Canada dealer. There are several plans available in various time, distance and deductible combinations which can be tailored to fit your own driving needs.
  • Page 204 Customer assistance Getting the service you need At home Ford Motor Company and Ford of Canada have authorized dealerships to service your vehicle. When you need warranty repairs your selling dealer would like you to return to it for that service, but you may also take your vehicle to another Ford Motor Company dealership authorized for warranty repairs.
  • Page 205 Customer assistance If you own a Lincoln vehicle and are away from home when your vehicle needs service, or if you need more help than the dealership could provide, after following the steps described above, contact the Ford Customer Assistance Center to find an authorized dealership to help you.
  • Page 206 What kinds of cases does the Board review? Unresolved warranty repair concerns or vehicle performance as designed concerns on Ford and Lincoln Mercury cars and Ford and Lincoln Mercury light trucks which are within the terms of any applicable written new vehicle warranty are eligible for review, except those involving: •...
  • Page 207 • a Ford or Lincoln Mercury dealership representative Consumer candidates for Board membership are recruited and trained by an independent consulting firm. The dealership Board member is chosen from Ford and Lincoln Mercury dealership management, recognized for their business leadership qualities. What the Board needs...
  • Page 208 Customer assistance • the names (if known) of all the people you contacted at the dealership(s) • a description of the action you expect to resolve your concern You will receive a letter of explanation if your application does not qualify for Board review.
  • Page 209 Customer assistance You may also contact the North American Customer Assistance Center at 1-800-392-3673 (Ford), TDD for the hearing impaired: 1-800-232-5952 or by writing to the Center at the following address: Ford Motor Company Customer Assistance Center 16800 Executive Plaza Drive P.O.
  • Page 210 Customer assistance The use of leaded fuel in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage. Ford Motor Company/Ford of Canada is not responsible for any damage caused by use of improper fuel.
  • Page 211 FORD ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford accessories are available for your vehicle through your local authorized Ford, Lincoln Mercury or Ford of Canada dealer. These quality accessories have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and aerodynamic appearance of your vehicle.
  • Page 212 Customer assistance Comfort and convenience Cargo nets Cargo organizers Engine block heaters Travel equipment Heavy-duty battery Inside rear view mirror (Electrochromic with compass and temperature display) Protection and appearance equipment Air bag anti-theft locks Car/truck covers Carpet floor mats Cleaners, waxes and polishes Flat splash guards Lubricants and oils Molded splash guards...
  • Page 213 Customer assistance • Mobile communications systems may harm the operation of your vehicle, particularly if they are not properly designed for automotive use or are not properly installed. When operated, such systems may cause the engine to stumble or stall. In addition, such systems may be damaged or their performance may be affected by operating your vehicle.

  • Page 214: Reporting Safety Defects

    Reporting safety defects REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect that could cause a crash, or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company.

  • Page 215: Index

    Index Accessory delay ......68 servicing ........166 Air bag supplemental Belt minder .........94 restraint system ....98,99,103 Brakes ........118 and child safety seats ....100 anti-lock ......118,119 description ......99,103 anti-lock brake system disposal ........106 (ABS) warning light ..10,119 driver air bag ....101,104 brake warning light ....10 indicator light ....9,102,105 fluid, checking and adding ..156 operation ......101,104...
  • Page 216 Index Compass, electronic Driving under special calibration .........19 conditions set zone adjustment ....18,19 through water ......131 Console Emergencies, roadside rear ..........70 jump-starting ......144 Controls Emission control system ..182 power seat ......84,86 Engine ........198 steering column ......60 check engine/service engine Coolant soon light ........8 checking and adding ....157 cleaning ........193...
  • Page 217 Index filter, specifications ..178,195 replacing bulbs .......184 fuel filler door override ....67 turning on and off ....23 fuel filler door release ....66 warning chime ......14 fuel pump shut-off switch ..133 Heating ........24 gauge .........15 HomeLink universal improving fuel economy ..179 transceiver (see octane rating ....177,198 Garage door opener) ...61,62,63,64...
  • Page 218 Index air bag ..........9 Oil (see Engine oil) ....153 air suspension ......12 Overdrive ......60,125 anti-lock brakes (ABS) ..10,119 Panic alarm feature, brake ..........10 remote entry system ....73 charging system ......11 Parking brake ......119 cruise indicator ......13 Parts (see Motorcraft parts) ..195 door ajar ........12 Power distribution box high beam .........10...
  • Page 219 Index memory seat ....69,76,88 active light ........13 SecuriLock passive anti-theft how to enable/disable ....121 system ........80,81,82 off light ........12 Servicing your vehicle ....150 Traction-lok rear axle ....126 Spark plugs, Transmission ......123 specifications ......195,198 fluid, checking and adding Specification chart, (automatic) ......164 lubricants ......197,198 fluid, refill capacities ....195 Speed control ......56...

  • Page 225: Filling Station Information

    Filling station information Required fuel Unleaded fuel only - 87 octane Fuel tank capacity 71.9L (19.0 gallons) Engine oil capacity 4.7L (5.0 quarts). Use Motorcraft (includes filter change) SAE 5W-30 Super Premium Motor Oil, Ford specification WSS-M2C153-G. Tire pressure and size Refer to the Certification Label located on the driver’s door.

This manual is also suitable for:

Navigator 2000

Table of Contents

Save PDF