Activating The Memory Feature; Deactivating The Memory Seat Feature; Replacing The Battery (Transmitter) - Lincoln 2008 Navigator Owner's Manual

Locks and Security
• 5–button remote

Activating the memory feature

To activate this feature:
1. Position the seat, rearview mirror, and adjustable pedals to the
positions you desire.
2. Press the SET control on the driver's seat.
3. Within 5 five seconds, press one control on the remote transmitter and
then press the 1 or 2 memory seat control to which you would like to
associate with Driver 1 or Driver 2 positions.
4. Repeat this procedure for another remote transmitter if desired.

Deactivating the memory seat feature

To deactivate this feature:
1. Press the SET control on the
driver's seat.
2. Within 5 five seconds, press any
control on the remote transmitter
which you would like to deactivate
and then press the SET control on
the memory seat control.
3. Repeat this procedure for another remote transmitter if desired.
Replacing the battery
The remote entry transmitter uses one coin type three-volt lithium
battery CR2032 or equivalent.
133
2008 Navigator (nav)
Owners Guide (post-2002-fmt)
USA (fus)