Engine Coolant Temperature Gauge; Odometer; Trip Odometer; Tachometer - Lincoln 2008 Navigator Owner's Manual

Ford 2008 navigator
Hide thumbs Also See for 2008 Navigator:
Table of Contents

Advertisement

Instrument Cluster
Engine coolant temperature
gauge: Indicates engine coolant
temperature. At normal operating
temperature, the needle will be in
the normal range (between "H" and
"C"). If it enters the red section, the
engine is overheating. Stop the vehicle as soon as safely possible, switch
off the engine and let the engine cool. Refer to Engine coolant in the
Maintenance and Specifications chapter.
Never remove the coolant reservoir cap while the engine is
running or hot.
Odometer: Registers the total miles
(kilometers) of the vehicle. Refer to
Message Center in the Drivers
Controls chapter on how to switch
the display from Metric to English.
Trip odometer: Registers the miles
(kilometers) of individual journeys.
Press and release the message
center INFO button until "TRIP"
appears in the display (this
represents the trip mode). Press the
control again to select Trip A and Trip B features. Press and hold the
RESET button for two seconds to reset.
Tachometer: Indicates the engine
speed in revolutions per minute.
Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.
18
2008 Navigator (nav)
Owners Guide (post-2002-fmt)
USA (fus)

Advertisement

Table of Contents
loading

Table of Contents