PowerWasher H1700 User Manual page 26

H1700
The H100 Powerwasher requires a 1 amp minimum rated circuit to function properly. It is important that your
unit does not share a circuit with any other electrical device. If the circuit is shared, the additional device will
create an amperage drain that ultimately causes the to draw more amperage in order to run full force. Eventually
the machine will overheat and shut itself down.
The Powerwasher shuts down as part of the designed safety feature to protect against overheating. The same
effect occurs when two or more outlets are connected to the same circuit. The diagram below shows outlet 1 and
outlet  on the same circuit.
In regards to overheating and restarting, the unit requires a minimum of a  minute period in which the machine
can properly cool.
R
H1700
PSI