NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 2
Slide Weight Stack Bumpers (24) and Weight Holder Slide
onto guide rods as shown.
Connect Upright (3) to Main Base (1) using:
2 x (33) Bolt
2 x (37) Nylon Lock Nut
Attach Seat Support (6) to Main Base (1) using:
2 x (33) Bolt
2 x (37) Nylon Lock Nut
ASSEMBLY
4 x (31) Washer
4 x (31) Washer