Condition At Delivery; Telephone Settings; Setting The Ring - Swisscom Classic D3 User Manual

3. Condition at delivery

The most common functions have been
pre-set so that you can make calls right
away.
Initial configuration
Numbering mode: Dual tone
multifrequency (DTMF). Pulse dialling (IMP)
is not possible with this telephone.
R button: Quick flashing (115 milliseconds)
Telephone: Ring volume
No. 7: No. 3 ring speed
Memories: empty

4. Telephone settings

4.1. Setting the ring

The volume and speed of the ring can be
modified.
Pick up the handset.
P Press on the program button.
Press 1. The current settings flash.
1
To adjust the volume, use buttons
1 = low through 4 = loud.
To adjust the speed, use buttons
5 = slow through 9 = fast.
Press the program button.
P
The new settings are memorised.
* Info * The new settings will not be
memorised if the procedure is
interrupted before it is finished.
P
1234 56789
P
5