25
Trunked Private Conversation™
Call Operation (800 MHz Only)
Introduction
The Private Conversation feature allows you to carry
on a conversation that is heard only by two parties. In
this feature, if you want to view the calling radio's ID
number before answering, press the
Answering a Private Conversation Call
1.
When your radio receives a Private Conversation
call, you will hear two alert tones, the display will
show "1-A PC" and you will hear the caller.
2.
Press the
(Call) button. The display will show
PC momentarily and then the incoming caller's ID
number.
CAUTION: If you press the PTT button before
you press the CALL button, the response will
be transmitted to everyone in the talkgroup
(see dispatch mode operation).
Note:
When in home display mode, if the PTT is pressed
before the repeater hang-up time, then the call
remains a private call.
3.
Press the PTT switch to carry on a Private
Conversation with the caller. The caller's ID number
will remain on the display for the duration of the
call.
Notes:
•
If there is a delay in answering your incoming call
and the system happens to be busy, then a busy tone
will be heard. When a channel becomes available,
you will receive a call back tone, and your radio
automatically keys up for three seconds so that you
can start your conversation. Press PTT to talk.
•
When the radio is Out of Range from the selected
Trunking site, a continuous low pitched tone is heard.
4.
When you have finished your conversation, press the
(Home) button to return to the home display.
(Call) button.