Motorola GTX User Manual page 49

49 Trunked Enhanced Private
Conversation™ Call Operation
(900 MHz Only Cont.)
Calling an ID Number at a Location in the Call
List (Cont.)
5. Press the PTT switch. Wait for a second to allow the
alert tone to sound in the receiving radio, then begin
talking.
Notes:
• If there is a delay in answering your incoming call
and the system happens to be busy, then a busy tone
will be heard. When a channel becomes available,
you will receive a call back tone, and your radio
automatically keys up for three seconds so that you
can start your conversation. Press PTT to talk.
• When the radio is Out of Range from the selected
Trunking site, a continuous low pitched tone is heard.
Note:
• If the radio you are calling is not in service, you will
not hear the ringing and the display will show "no
rESP". Go to step 6 to hang up.
6a. If the party you are calling does not answer the call
within twenty seconds, the display will show "no
AnS"; the telephone ringing will stop and an alert
tone will sound. At this point you can either send a
Call Alert™ page (go to step 1 of "Leaving a Call
Alert Page when the called party does not answer
the Private Conversation Call"), or go to step 8 of
this procedure to hang up.
or
6b. If the party you are calling does answer the call, you
will hear his/her voice.
7. Press the PTT switch to carry on a Private
Conversation with the called person.
8. When you have finished your conversation, or if the
radio you are calling does not answer or is not in
service, press the
radio will return to the home display.
(Home) button to hang up; the