Scan Operation
17
Talkback Delay
You may talkback during a detected activity for a pre-
programmed (RSS) time period after the activity ends.
After this time period, the radio will resume scan.
Scan List Programming/Viewing
If you desire to make changes in the scan list, follow
the steps given below:
1.
Press the menu button until "SCAn PrG" is displayed.
2.
Press Select button located above the PTT switch.
3.
Four beeps are sounded and display shows the default
home channel and the scan status. The scan icon
indicates that the displayed mode is in the scan list.
4.
To add a member or delete a member from the list,
press the select button. To scroll through active scan
members list, press
through all modes in the radio (trunk and
conventional) use the scroll
If you want to add a member to the list, and the list is
full, the radio indicates this with a medium beep.
5.
When you have finished scan programming/viewing,
press the
(Home) button to exit.
(Scan) button; but to scroll
or scroll
button.