Motorola GTX User Manual page 40

40 Call Alert™ Page Operation
(cont.)
Paging an ID Number at a Location in the Call
List (Cont.)
7a. If you hear one beep, it indicates that the ID number
has been received by the system, the radio you are
paging is not on the air, and your radio remains in
the Call Alert mode. You can either go back to step 3
and press PTT switch to send the ID number again,
or press the
home display.
Note:
If after six seconds the called radio fails to
acknowledge the alert, a low-pitch alert tone sounds
and the display changes to
this sequence again.
or
7b. If you hear five beeps, it indicates that the ID
number has been received by the system, the radio
you are paging is on the air and has received your
page. The display shows "SCC" momentarily and
the radio automatically returns to the home display.
(Home) button to return to the
"no rESP" You may try